Phobos P430, Руководство пользователя

Страница: 15 / 81

C O N F I G U R I N G T H E N I C S P E E D A N D D U P L E X M O D E
The P430 can operate at either 10Mbps or 100 Mbps (Fast Ethernet)
in half- or full-duplex mode. The default is auto-negotiation/auto-sense;
if auto-negotiation fails, the default is half-duplex.
N O T E :
The P430 supports NWay Auto-Negotiation as defined in
ANSI/IEEE standard 802.3u Draft 5. If any link does not support
auto-negotiation, the P430 will automatically “auto sense” the correct
speed. Or, you can disable the auto sensing and set the speed and
duplex mode manually.
1. Open “Control Panel.”
2. Open “Network.”
3. Click on the “Adapters” tab on the top of the window.
4. Highlight the port you want to configure and click on “Properties.”
A window will appear where you can select from the following options:
• Auto-Negotiation (default):
Automatically selects the cable speed and duplex mode.
•10 Mbps/Half Duplex:
Forces the connection to 10 Mbps in half-duplex mode.
•10 Mbps/Full Duplex:
Forces the connection to 10 Mbps in full-duplex mode.
INSTALLING
DRIVER
SOFTWARE