Phobos P430, Руководство пользователя

Страница: 24 / 81

1: Force 10BASE-T Half Duplex mode.
2: Force 10BASE-T Full Duplex mode.
3: Force 100BASE-T Half Duplex mode.
4: Force 100BASE-T Full Duplex mode.
R X R I N G S I Z E : This option selects the number of receive buffers for
the driver to use, as described above.
T X R I N G S I Z E : This option selects the number of transmit buffers for
the driver to use.
Finally, the P430 driver also supports the standard FRAME , NODE , and
NAME
command-line options.
I
N S T A L L I N G T H E
P
H O B O S
L
I N K
D
R I V E R F O R
N
E T
W
A R E
:
This section describes how to install the PhobosLink driver for NetWare,
which supports trunking with automatic fail-over and adaptive load
balancing. This driver is typically used with servers that require a
high-bandwidth connection to a single logical IPX or TCP/IP network,
beyond the performance that a single 100Mbps link could provide.
N O T E :
Even though you will be using the PhobosLink driver to aggregate
the bandwidth of multiple physical ports into a single logical link
as seen by NetWare, you must still load a separate instance of the
PHBSLINK driver for each physical port.
One of the ports in each group is designated the "master"; which port
is the master makes no difference technically, but for consistency we
recommend designating the first (lowest-numbered) port in each
group as the master. All of the ports in the group will then be bound
together by entering the port number of the master in the "Group
Master Port Number" field for each port, as described below. Any
4– 6