Phobos P430, Руководство пользователя

Страница: 18 / 81

•
A
SY M M E T R I C
:
Use this setting if the ports on the P430 in the group
are connected to a switch (or switches) that do not support trunking.
Under this setting, the P430 will balance the outgoing load across
all the ports in the group, but incoming data will only be received
on one port.
•
F
A I L O V E R
O
N LY
:
This setting enables only failover capability.
Only one port will be used at a time, with the link(s) serving as
backup. NOTE: that the Symmetric and Asymmetric trunking
modes also support failover. Use this setting only to obtain
failover functionality without trunking.
6. Repeat the steps above to create other groups or trunks. You
can delete groups by highlighting the group and clicking on
“Delete Group.”
7.
Click “OK.” See figure 3-1
The next step is to close the Network Control panel so that you
can assign addresses to your newly created trunks. The procedure is
the same as described in Chapter 3: ”Assigning Network Addresses.”
8.
Follow the steps 1–4 in “Assigning Network Addresses” in Chapter
3 to give your new trunks proper network addresses.
9.
Reboot your machine.
3– 6