Phobos P430, Руководство пользователя

Страница: 26 / 81

4. Two windows will appear: one labeled, "Selected Network Drivers",
which will probably be empty unless the system already contains
other LAN adapters with corresponding drivers loaded; and a menu
labeled "Additional Driver Actions." From this menu choose "Select
a driver."
5.
When the driver listing window appears, press the Ins or Insert key
to load a driver from CD.
6. Insert the Phobos driver disk into the CD drive.
7.
At the next prompt, press F3 to specify a different path than the
default.
N O T E :
If you are using NetWare 4.11 and have not installed the ODI33F
patch available from the Novell web site, then enter 'Phobos:\nwserver\4x'
to select the NetWare 4.x driver. If you are using NetWare 5.x, or
NetWare 4.x with the ODI33F patch, then enter 'Phobos:\nwserver\5x'
to select the NetWare 5.x driver.
8. After a few seconds, a menu should appear listing two different
drivers: P430.LAN and PHBSLINK.LAN. Choose PHBSLINK.LAN.
9.
At the prompt asking whether to copy the driver, choose Yes.
10. If the INSTALL program asks whether to save the existing files
PHBSLINK.LAN and PHBSLINK.LDI, choose No to overwrite
them with the new version from the floppy disk.
11. A screen will appear containing three windows, labeled "Protocols",
"Parameters", and "Board Actions". This screen will appear once for
each P430 port available (i.e., four times if you have a single P430
board plugged into the machine), allowing you to configure each
port independently. Use the arrow keys to move between the
three windows and between the different options within each
window. In the topmost window, select the protocols that should
be bound to this port.
4– 8