Phobos P430, Руководство пользователя

Страница: 21 / 81

N O T E :
If you are using NetWare 4.11 and have not installed the ODI33F patch
available from the Novell web site, then enter 'Phobos:\nwserver\4x' to
select the NetWare 4.x driver. If you are using NetWare 5.x, or
NetWare 4.x with the ODI33F patch, then enter 'Phobos:\nwserver\5x'
to select the NetWare 5.x driver.
8. After a few seconds, a menu should appear listing two different drivers:
P430.LAN and PHBSLINK.LAN. Choose P430.LAN.
9.
At the prompt asking whether to copy the driver, choose Yes.
10. If the INSTALL program asks whether to save the existing files
P430.LAN and P430.LDI, choose No to overwrite them with the
new version from the CD.
11. A screen will appear containing three windows, labeled "Protocols",
"Parameters", and "Board Actions". This screen will appear once for
each P430 port available (i.e., four times if you have a single P430
board plugged into the machine), allowing you to configure each
port independently. Use the arrow keys to move between the three
windows and between the different options within each window. In
the topmost window, select the protocols that should be bound to
this port.
The parameters window contains the following fields:
P
O R T
N
U M B E R
:
Enter the index number of the physical P430 port to use:
e.g., 1 for the topmost port (the port closest to the mounting screw on
the P430 board's backplane) on the first P430 board, 4 for the bottom
most port on the first board, 5 for the first port on the second board, etc.
This parameter is required.
INSTALLING
DRIVER
SOFTWARE