Phobos P430, Руководство пользователя

Страница: 16 / 81

•100 Mbps/Half Duplex:
Forces the connection to 100 Mbps in half-duplex mode.
•100 Mbps/Full Duplex:
Forces the connection to 100 Mbps in full-duplex mode.
5. Select the operating mode.
6. Click OK.
L O A D I N G A N D C O N F I G U R I N G
P
H O B O S
L
I N K
This chapter shows you how to install and configure PhobosLink, the
port aggregation software from Phobos. The P430 NIC is config-
urable into any combination of logical and physical interfaces using
the Phobos Installation software. For example, you can configure 3
logical interfaces using two of the P430 ports for one interface and
have the other two ports as regular 10/100Base-T connections, or you
can configure a single logical interface using all 4 of the P430 ports as
a single trunk, creating aggregate bandwidth of 400Mbps.
The installation is the same as for the P430 driver software. Refer to
Chapter 3. Windows NT should be up and running. Use the instal-
lation disk that came with your P430. The NIC should already be
installed in your machine.
1. Install PhobosLink by following steps 1–7 in Chapter 3:
“Loading the Software.” Once the software is loaded, the screen
shown in figure 4-1 will appear: In this window, you create links by
selecting interfaces from the “Available Interfaces” window.
2. Click “Create Group.” A new group will appear in the window
representing your new trunk.
3– 4