Phobos P430, Руководство пользователя

Страница: 65 / 81

3. Make sure the card is seated correctly in the slot.
Examine the PCI slot with the P430 to make sure the card is completely
seated in the slot.
4. Make sure you can use ‘
ping
‘ to find a host on the same subnet.
The command ‘
ping
‘ is used to test network operation. Being able
to “ping” on the same subnet proves that the NICs are functioning
and configured properly.
The following is an example of a ping on the same subnet.
example: ˜> ping 123.45.67.89
PING 123.45.67.89 (123.45.67.89) : 56 data bytes
64 bytes from 123.45.67.89: icmp_seq=0 ttl=225 time=1 ms
64 bytes from 123.45.67.89: icmp_seq=1 ttl=225 time=1 ms
64 bytes from 123.45.67.89: icmp_seq=2 ttl=225 time=1 ms
64 bytes from 123.45.67.89: icmp_seq=3 ttl=225 time=1 ms
----123.45.67.89 PING Statistics-----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 1/1/1ms
W I N D O W S N T T RO U B L E S H O OT I N G
1.
Make sure speed setting is correct.
The network speed is determined by the switch/hub connected to
the P430. Use Properties to configure the speed of the P430. If
connected to a switch, the switch must also be configured properly.
If the switch and the P430 are unable to correctly negotiate their
speeds, manually set the speed setting using the Properties’ (see
page 2-2) for the P430 and force the switch port (see switch manu-
facturer’s guide included with your switch).
9–2