Phobos P430, Руководство пользователя

Страница: 46 / 81

To set the duplex mode of interface pqfe1 to full-duplex:
# /usr/bin/pqfe_control -i pqfe1 -d full
To see the current settings of all Phobos pqfe NICs:
# /usr/bin/pqfe_control
If you are unsure of your network link speed and duplex mode,
use the factory defaults of auto-speed sense and half-duplex.
Changing the speed setting with the graphic-based utility:
1.
Type
/usr/bin/PQFEControl
and press
[ENTER]
.
The screen shown in figure 6-1 will appear.
2. Enter the desired settings in the appropriate boxes.
3. Click on “Quit.”
F I G U R E
6 - 1
Now use the ‘ifconfig’ command to activate the new interfaces
For example, to activate the interface pqfe0, type;
# ifconfig pqfe0 plumb
The interface is now active and can be configured. (See Solaris manual
for further instructions on configuring network interfaces.)
6– 6