Chapter 4 Software index
4-10
4.3 Parameter function description
Basic function parameter list
F00 Inverter horse power capacity
F00
Inverter model
F00
Inverter model
1P2 1P2
203
203
1P5
1P5
401
401
101
101
402
402
2P2
2P2
403
JNEV
403
2P5 2P5
201
JNEV
201
202
202
F01 Acceleration time 1 (s): 00.1 – 999
F02 Deceleration time 1 (s): 00.1 – 999
Formula for acceleration/deceleration time: Denominator is based on the setting of Cn14
a) Motor rating frequency (Sensor less vector control C14=000)
b) Max output frequency (V/f mode C14=001)
a)
Set frequency
Set frequency
Acceleration time = F01×
Deceleration time =F02 × (vector)
F45(rated frequency) F45(rated frequency)
b)
Set frequency
Set frequency
Acceleration time
=F01×
Deceleration time
= F02 ×
(V/F)
C17(Max output frequency)
C17(Max output frequency)
F03 Motor rotation direction 000: Forward
001: Reverse
Parameter F04 =000 must be set to 000 for this function to be effective.
F04 Run signal source
000: keypad
001: External Terminal
002: Communication Control
1.) F04=000, inverter is controlled by keypad.
2.) F04=001, inverter is controlled by external terminal.
3.) F04=002, inverter is controlled by serial communication.
F05 Frequency signal source
000: UP/Down Key on keypad
001: Potentiometer on keypad
002:TM2 input signal (Terminal AIN)
003: Multi-function input terminal UP/DOWN function
004: Frequency set by communication method
(When C47=1,Remote Keypad has priority)
1.)
F5=001, when any of parameter group F11~ F15 is set to 015 and multi-function input terminal
is OFF, the frequency is set by the potentiometer on the Keypad. If the multi-function input
terminal is ON, the frequency is set by the analog signal (auxiliary speed) from TM2.
2.)
F5=002, when any of parameter group F11~ F15 is set to 015 and multi-function input terminal
is OFF, the frequency is set by the analog signal (auxiliary speed) from TM2. If the multi-
function input terminal ON, the frequency is set by the potentiometer on Keypad.
