Pereko KSR Beta Pelet 16, Руководство по эксплуатации и обслуживанию

Страница: 80 / 184

4
1. Safety
Incorrect electrical connection of the room
panel with S.Control, R.Control regulator can
cause damage both to the Room Control
room panel and S.Control, R.Control
regulator. Therefore, installation has to be
done by a qualified installer.
Additional protective measures should be
taken in order to prevent results of
malfunction of the regulator or of errors in its
software which could result in a loss of
property or other dangerous consequences,
i.e. freezing of water in hydraulic system.
2. Purpose
Room Control room panel is a modern
electronic device mainly used as a
programmable
room thermostat. The
regulator provides very simple and effective
way
to control indoor temperature.
Temperature sensor included in the regulator
enables
reading and programming
temperature with the accuracy o f 0,1°C.
Regulator can be programmed in a 7-day
cycle with the accuracy of 0,5 hour.
Therefore, there is a possibility of 48
temperature changes per day. User can
preset different time zones for each day of
the week.
After connecting two additional temperature
sensors, the Room Control room panel
provides temperature control in three
independent rooms.
The Room Control room panel also has a
function of additional panel for boiler
regulator control.
It can be used in household and similar
facilities, as well as in slightly industrialized
facilities.
3. Information about documentation
The Room Control room panel manual is a
supplement for the corresponding S.Control,
R.Control regulator. In particular, except for
this manual, the regulator manual should
also be observed. We are not responsible for
any damages caused by failure to observe
these instructions.
4. Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it was
available at any time. In the case of moving
or selling the device, the attached
documentation should be forwarded to the
new user/owner.
5. Applied symbols
In this manual the following graphic symbols
are used:
- useful information and tips,
- important information; failure to
observe these can cause damage of
property, threat for human and
household animal health and life.
Caution: the symbols indicate important
information, in order to make the manual more
lucid. Yet, this does not exempt the user and
installer from the obligation to comply with
requirements which are not marked with graphic
symbols!
6. WEEE 2002/96/EC Directive
Act on electrical and electronic
equipment
x
Recycle the product and the packaging
at the end of the operational use
period in an appropriate recycling
plant,
x
Do not dispose of the product together
with normal waste,
x
Do not burn the product.