background image

 

WARNING: 

  Improper installation, adjustment, alteration, maintenance can cause property damage, injury, 

  or death. Read the installation, operating and maintenance instructions thoroughly before 

  installing or servicing this equipment.

IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE

Broiler must be kept free of combustible materials, and the flow of ventilation air must not  

be obstructed. Operating personnel must not perform any maintenance or repair functions. 

Contact your Nieco Authorized Service Agent for service or repair.

Model MV74 Electric

Owner’s Manual

Fill in the information bellow and have it handy when calling your authorized service agency for assistance.  

The serial number is on the broiler rating plate on the back of the unit.

 

Purchased from: __________________________________________________________

 

Date of Purchase: _________________________________________________________

 

Model No.: _______________________________________________________________

 

Serial No.: _______________________________________________________________

Содержание MV74 Electric









































Отзывы: