Pereko KSR Beta Pelet 16, Руководство по эксплуатации и обслуживанию

Страница: 110 / 184

18
9. HYDRAULIC SCHEMES
9.1 SCHEME 1
Pic. 14
Scheme with 4 way steering valve controlling central heating circuit 1 , where: 1 – boiler, 2 –
burner, 3 – controller, 4 – boiler temperature sensor CT4, 5 – fumes temperature sensor CT2S (only a
preview of temperature), 6 – servomotor of 4 way valve, 7 – mixer cycle pump, 8 – mixer cycle
temperature sensor, 9 – hot water container, 10 – hot water pump, 11 – hot water temp. sensor CT4, 12 –
weather temperature sensor CT4-P, 13 – room panel Room Control or standard room thermostat, 14 –
return temperature sensor CT4 (it is not necessary to operate the system).
To improve water circulation in gravity cycle it is necessary to use large nominal profiles
DN of a pipe and 4 way valve, not to use large amount of knees and profile narrowings.
Use other rules referring to gravity installations. If return sensor is installed closely, it is
necessary to isolate it thermally from surroundings and improve thermal contact with
pipe. Preset container temperature must be set so high to ensure thermal power for mixer
cycle when at the same time heating water returning to the boiler.
RECOMMENDED SETTINGS:
Parameter Setting MENU
Preset boiler temperature
75-80 q C
boiler settings
Mixer service 1 CH activated service settings o mixer settings 1
Max. mixer temperature 1 70 q C service settings o mixer settings 1
Mixer heating curve 1 0.8 – 1.4 mixer heating 1
Mixer weather control 1 activated mixer setting 1
1
Shown hydraulic scheme does not replace the project of central heating and serves only as a sample!