Pereko KSR Beta Pelet 16, Руководство по эксплуатации и обслуживанию

Страница: 107 / 184

15
Night time decreases for boiler, heating
circuits, HUW tank and circulation pump
operation.
The intervals can be used to define time
periods at which lower preset temperature
may be set e.g. for a night time or when the
user is not at home (e.g. he/she left for a
work/school). This feature enables automatic
reduction of preset temperature without
compromising the heat comfort and reduces
fuel consumption. Decrease of preset boiler
temperature in selected time intervals is
indicated by the symbol
on the main
screen.
To activate time intervals, set the
parameter:
Night time decrease for boiler or
the given heating circuit to On . The
parameter Decrease value set the temp. the
reduction, one for all time intervals.
Decrease night can be defined separately for
every day of the week set
Schedule .
Select the lowering of the temperature set
point and the beginning and end of a given
time interval.
Pic. 9 Bar graph, time intervals-24h.
The time interval is ignored when
set to lower value,, 0 "even if the
time in the range of hours.
8.20 Circular pump control
Functionality of circular pump is available
after connecting to Output H controller or
additional module C.
Should be set the support
Outputs H mod A
or Output H mod B/C to support the
circulation pump in:
Service settings
→
Output H mod A,
Output H mod B/C
=
Circulation pump
Settings are in:
Night time decrease
→
Circulation pump
and
Service settings
→
CH and HUW settings
Settings of time control of circular pump are
analogical to settings of night reductions. In
defined time periods circular pump is
deactivated into
Circulation standstill time .
In omitted periods the circular pump is
switched into position
Circulation operation
time .
8.21 Fuel level configuration
x Fuel level indicator activating
To activate displaying fuel level following
parameters are to be set
Boiler setting
→
Fuel level
→
Alarm level
On value bigger than “0”, i.e. 10%
Twisting “TOUCH and PLAY” knob in main
window fuel level is displayed in main
window. Tip: fuel level can also be seen in
room panel Room Control/ Room Control
TOUCH.
Pic. 10 Additional window with fuel level view.
x Fuel level indicator service
Each time when fuel container is filled to
required level it is necessary to press and
keep the knob [about 2 s] in main window.
Following info will appear:
Pic. 11 Fuel level operation.
After choosing and accepting „YES” fuel level
will be set for 100%. Attention: Fuel can be
refilled anytime, that means it is not needed
to wait till the container is empty. However
fuel should be filled up to the level
corresponding to 100% and set the controller
level by pressing knob.
x Description of activity
The controller measured fuel level on the
basis of its current consumption. Factory
settings will not always correspond to actual
fuel consumption , so to work correctly this
method needs level calibration by controller’s
user. No additional fuel sensors are required.