PERCo IC-05, Руководство по сборке и эксплуатации

Страница: 28 / 34

IC-05 Card Capture Reader
27
-
"Direction:" – "1" or "2" (depending on the passage direction that is controlled
by the card capture reader):
 Set the following parameter values for the output that is physically connected to the
“Capture card” input of the card capture reader:
-
"Normal state:" – "Not energized" ,
-
"Function:" – "Output" :
3. Add the following Internal response in "Configuration"

"Edit"

"Internal
response" section:

"Source type:" – "Visitor ID card presentation" ,

"Source number:" – "1" (number of OD that is physically connected to the
card capture reader),
 "Source direction:" – "1" or "2" (depending on the passage direction that is
controlled by the card capture reader),

"Receiver type:"
–
"Activate output"
,

"Receiver number:" - "3" (number of the output that is physically connected to
the “Capture card” input of the card capture reader),

"Response characteristic:" – "Response time" :