PERCo IC-05 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 34

PERCo IC-05 Скачать руководство пользователя страница 12

IC-05 Card Capture Reader

11

6 MARKING AND PACKAGING

The card capture reader has a marking - a label placed on the internal side of the back

panel. It contains the name of the product, designation, the date of manufacture, the serial

number.
The card capture reader in the standard delivery set is packed in a transportation box that

protects its components from damage during transportation and storage.
Box overall dimensions (L × W × H) ............................................................. 112×23×28 cm

Box weight ......................................................................................................... max. 23 kg

7 SAFETY REQUIREMENTS

7.1 Installation safety requirements

Installation should be carried out by qualified personnel after careful study of this Manual

in accordance with general rules for electrical and installation works.

Attention!

While installation:



all works should be performed only with the power supply switched off from the

AC mains;



only serviceable tools should be used for installation;



while the installation of the card capture reader until it is fixed, be extra cautious

and protect it from falling down;



before the first switching of the card capture reader make sure it is installed

correctly.

Installation of the power supply unit should be done in compliance with safety measures

described in its certificate.

7.2 Operation safety requirements

Observe general electrical safety rules when operating the card capture reader.

Warning! Not allowed to operate the card capture reader:



under conditions that do not comply with the requirements of Chapter 2 of this

Manual.



at supply voltage that does not comply with the requirements of Chapter 3 of this

Manual.

The operation of the power supply should be done in compliance with safety measures

described in its certificate.

«
...
10
11
12
13
14
...
»

Содержание IC-05



































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды