IC-05 Card Capture Reader
23
configure response of the controller to the activation of the input number 5 by
using the activation or normalization parameters of the outputs, for example, the
activation of an additional output of the controller number 5 that is connected to
the alarm system:
11.
Attention!
If the passage permission indication of the card capture reader is controlled
directly from the control board of the turnstile, then, it is not necessary to fulfill
the requirements of this paragraph.
To do this: select
"Additional output
№..."
(number of the output must match the
output of the controller that is physically connected to the
“LED”
input of the card
capture reader) and set the following parameters by using the drop-down menu:
set
"Standard"
value for the
"Type"
parameter;
set
"Not energized"
value for the
"Normal state"
parameter.
12. Click
"Save and close"
button. The
"Device properties"
window will be closed.
13. Within the main controller, select the controller of the OD which is controlled by a card
capture reader:
14. Click
"Edit"
button on the page toolbar. The
"Device properties"
window
will appear.
15. Switch to
"Reader № ... "
tab (number of the reader must match the reader, which
is controlled by the card capture reader).
16. The “Card captured” signal sent by the card capture reader is considered as a
confirmation of withdrawal of the card. To configure the confirmation parameters,
select the group of
"Verification"
parameters and set the following values:
for
"Verification"
parameter:
-
set
"External verification device"
value, if the card reader acts as an
external verification device for a controller ("Card captured" signal is sent to a
separate input of the controller),
Содержание IC-05
Страница 1: ...Card Capture Reader IC 05 ASSEMBLY AND OPERATION MANUAL ...
Страница 2: ...Card Capture Reader IC 05 Assembly and Operation Manual ...
Страница 34: ...www perco com ...
