PERCo IC-05, Руководство по сборке и эксплуатации

Страница: 22 / 34

IC-05 Card Capture Reader
21
Appendix 1. Configuring the ACS-controller to work with the
card reader in the PERCo-Web software
Attention!

It deals with only the parameter settings of the controller regarding the
operation of the card capture reader.

Visitor's cards that should be withdrawn, must be set to obligatory verification
process upon presentation to the reader in the direction controlled by the card
capture reader.
1. Log into the system by using a Web browser (see
PERCo-Web Administrator's
manual
).
2. Go to
“Administration”

“Configuration”
section by using the navigation bar.
3. On the page working area select the main controller that is physically connected to the
card capture reader:
4. Click "Edit" button on the page toolbar. The "Device properties" window will
appear.
5. In the appeared window select "Additional outputs" tab.
6. In the window working area, select "Additional output №..." (number of the output
must match the output of the controller that is physically connected to
“Capture card”
input of the card capture reader).
7. Specify the following parameters by using the drop-down list on the window working
area:

set "Standard" value for "Type" parameter;

set "Not energized" value for the "Normal state" parameter: