Pepperl+Fuchs Pulscon LTC57 Скачать руководство пользователя страница 152

Страница: 152 / 176

201

5-0

152

Pulscon LTC57 PROFIBUS PA

Operating menu

15.4.2

Event logbook submenu
Event logbook

Filter options

15.4.3

Event list submenu
Event list

Note:

The

Event logbook

submenu is only available when operating via the local

display. When operating via PACTware, the event list can be displayed in the

PACTware function

Event List/HistoROM

Navigation

Diagnostics



Event logbook

Blocking
Navigation

Diagnostics



Event logbook



Filter options

Description

Select category (status signal) whose event messages are displayed in the events

list.

Selection

• All
• Failure (F)

• Function check (C)

• Out of specification (S)
• Maintenance required (M)

• Information (I)

Factory setting

All

Additional information

• This parameter is used only when operating via the local display.

• The status signals are categorized according to NAMUR NE 107.

The

Event list

submenu displays the history of past events of the category selected

in the

Filter options

parameter (page 152). A maximum of 20 events are displayed

in chronological order. If the advanced HistoROM functionality has been activated

in the device, the event list may comprise up to 100 entries.
The following symbols indicate whether an event has occurred or has ended:

•

: Event has occurred

•

: Event has ended

Note:

Information on what is causing the message, and remedy measures, can be

viewed via the button.

Display format

• For event messages in category I: information event, event text, "recording

event" symbol and time the event occurred

• For event messages in category F, M, C, S (status signal): diagnostics event,

event text, "recording event" symbol and time the event occurred

Navigation

Diagnostics



Event logbook



Event list

Содержание Pulscon LTC57

















































































































































































Результаты поиска

Содержание Pulscon LTC57

Отзывы:

Pepperl+Fuchs Pulscon LTC57, Руководство пользователя, Страница: 152 / 176

Результаты поиска

Содержание Pulscon LTC57

Отзывы: