PACTware Multi-Input/Output Device Type Manager
2
0
1
8
-0
7
89
Setting Up the MIO Device as a Valve Coupler
1. Activate the Valve Coupler mode with the radio button.
2. Set the required ident number with the radio button.
3. Click on
Next
to confirm.
The parameter settings are adjusted for the device and a summarized overview of all the
settings made is displayed.
4. Your basic device setup is complete. If you intend to change the settings, click on
Change
Configuration
or on
Start
to restart the basic device setup.
10.4.1
Tab "Device Information"
This tab enables you to view or change device information as required, including general
information on the sensor and identification information needed throughout your process.
Figure 10.23
"Device Information" tab
The tab "Device Information" contains the following information and parameters:
Note!
Changing the PROFIBUS Ident Number in the Online Mode
If you use the menu command in online parameterization, a change of ident number selection
takes immediate effect. The device is automatically rebooted with the ident number selected.
More Information
For more information on ident numbers, see chapter 3.3.
