Configuration
45
2.
Click the Add Record button
3.
Enter all information required about each Matrix Frame
S X 8 5 0 M A T R I X F R A M E S - D e f i n i t i o n
F i e l d D a t a
ID
Unique record ID assigned by Admin Console as a frame is added, in order to identify one frame to the
system. 1 to 1,098.
Admin Console automatically generates this number in consecutive order. Upon adding frames, the
system will automatically assign the next available number.
Component ID and sequence ID numbers are used primarily in the permission tabs to identify one
component or sequence from another in row and column style. Since logical and local numbers are not
necessarily unique or consecutive; and the permission grids are displayed as consecutive, unique
numbers; Admin Console generates these ID numbers.
I/F
Numeric Ethernet interface number identifying a port on a CPU where the matrix frame will connect. 0 to
15, though generally 0, 1, or 2.
IPA
Unique Internet Protocol address assigned by the system administrator. Dotted decimal, 15 characters
(including dots).
Example:
128.010.050.125
Name
A name for the matrix frame. Alphanumeric, 16 characters.
Boot
The name of the file used by the frame’s booting process. Use the default filename unless instructed to
do otherwise by qualified personnel. The file name IS case sensitive.
Be sure to check a frame type first, such as controller, OSD, switch, or alarm I/O so that the default frame
boot name will be filled in automatically.
If the boot name field is filled in before the type is selected, the default boot name will not be inserted.
Location
A name for the matrix frame location. Alphanumeric, 16 characters.
Ser.
Manufacturer’s serial number. Alphanumeric, 16 characters.
MXCONT
Check
9
if one (or more) WJ-PB85X08 input cards is installed.
If
MXCONT
(camera control function) is checked, then select range of numbers in
Input Ports
.
This range will be unique to the entire frame for the controller function, regardless of the number of input
cards installed within the frame.
MXOSD
Check
9
if one (or more) WJ-PB85T0B OSD cards is installed.
If
MXOSD
(on screen display function) were checked, you would need to select a range of numbers in
Output Ports
.
This range will be unique to the entire frame for the OSD function regardless of the number of OSD cards
installed within the frame.
MXSW
Check
9
if one (or more) WJ-PB85C16 video crosspoint
input
cards and WJ-PB85M16 video crosspoint
output
cards are installed.
If
MXSW
(switching function) were checked, you would need to select a range of numbers in
Input Ports
and
Output Ports
.
These ranges will be unique to the entire frame for the switching function regardless of the number of
input or output cards installed within the frame.
MXALM
Check
9
if one (or more) Alarm Input WJ-PB85A32 or Alarm Output WJ-PB85L32 card(s) is installed in
this frame.
If
MXALM
(alarm I/O function) is checked, then select a range of numbers in
I/O Ports
.
This range will be unique to the entire frame for the alarm I/O function, regardless of the number of alarm
I/O cards installed within the frame.
LCPU Address
Set the matrix frame LCPU identifier on the rotary switches SW12, SW10, and SW9. 0-0-1 to F-F-F.
Содержание WJMPU955A - CENTRAL PROCESSING UNIT
Страница 6: ...2 This page intentionally left blank ...
