Configuration
128
2.
From the drop-down box, select the log type you wish to
view: Switching, Operator, Alarm, or Video Loss
Information given in each log type is as follows.
OPERATOR LOG
DATE:
YYYY MMM DD format
DAY:
Day of the week
TIME:
AM or PM (12 hour format)
SCTL:
System controller ID on which the specified operator established an event
OPER:
ID of the operator that performed an event
EVENT:
Operator’s action performed toward a system controller: logon or logoff
performed by an operator; timeout; logoffnop - automatic logoff due to lack of operation;
logoffsys - automatic logoff due to an error, system reboot, etc.
ALARM LOG
DATE:
YYYY MMM DD format
DAY:
Day of the week
TIME:
AM or PM (12 hour format)
ALMID:
The ID of the alarm that established the event.
TRIGGER:
The alarm source that generated the alarm. The source ID is presented
proceeded by a letter indicating the source. “C” for camera motion, “D” for (digital) I/O
port, or “S” for serial (RS232) port.
ACTION:
The status changes that were ocurred on an Alarm (active, reset, etc.).
OPER:
The operator ID of the individual who acknowledged the alarm (if the alarm was
manually acknowledged)
Содержание WJMPU955A - CENTRAL PROCESSING UNIT
Страница 6: ...2 This page intentionally left blank ...
