40
■
Rec. cam.
Select a camera channel (Cam.1 - Cam.64, "--") used
for recording. When no camera channel is selected
("--"), recording will not be performed.
■
Preset position
Select a preset position (blank, 1-256) to which the
camera will move upon reception of a terminal alarm for
each terminal.
When no position is entered (blank), the camera does
not move to any preset position.
Default:
blank
■
Output terminal
Select "On" or "Off" to determine whether or not to out-
put an alarm signal at an event occurrence.
Default:
On
Setup items
Terminal alarm
Configure the settings relating to event actions to be taken at a terminal alarm occurrence.
Refer to the operating instructions (PDF) for information on how to register the preset positions of cameras.
1
Click the [Event] button.
2
Click the [Terminal alarm] tab.
The "Terminal alarm" page will be displayed.
3
Configure each setting item.
Refer to "Setup items" mentioned below.
To display the setting page of the terminal whose
number is not on the current page, click the desired
terminal number range displayed above the [Set]
button.
When displaying other setting page of the terminal
by clicking the terminal number range above the
[Set] button, the settings edited on the currently dis-
played setting page will be saved and applied.
4
Click the [Set] button.
