29
The "Camera Registration Result" window will be
displayed after the registration is complete.
6
Check the registration result.
• Up to 64 cameras can be registered.
• Only the newly registered cameras will be displayed
on the "Camera Registration Result" window. Even
when 65 or more cameras are on the network, only
64 cameras will be displayed.
• When the same IP address is assigned to multiple
cameras, the IP address used for multiple cameras
and the MAC addresses of the cameras will be dis-
played in red. Make sure that the IP addresses of
the cameras are all different and the same address
is not used for two cameras or more.
7
Click the [OK] button.
Registration of the cameras will complete.
Important:
• When the [Registration] button is clicked after
selecting "Register the IP address automatically
given by this unit to a detected camera", IP
addresses will be assigned to all the detected cam-
eras. Start registration of the camera after confirm-
ing that no problem will occur when some cameras
are already in operation.
Note:
• When the desired camera is not detected or when
the settings of a camera are required to be changed,
configure the settings on the "NW camera" page
(page 49).
• When the camera registration is complete, all login
users will forcibly be logged out.
• All recordings will stop in the process of the camera
registration.
• Camera auto-registration will not work with cameras
in the different subnet via a router.
• To enhance the security, a camera can be detected
for only 20 minutes after turning on the power of the
camera when the default IP address is changed
depending on the model of the camera. Refer to the
operating instructions of the camera in use for fur-
ther information.
• The compression method of the registered camera
will be set to "JPEG" or "M-JPEG" automatically.
Setup items
■
Port setup
Select a port to which the camera to be registered is
connected.
Camera port (default)/Client PC port
■
Camera auto-registration
Determine how to assign IP addresses to the detected
cameras.
"Register the IP address automatically given by this unit
to a detected camera" (default)
"Register the IP address set with a detected camera"
Note:
• When "On" is selected for "DHCP" of "Port setup"
of the recorder, it is impossible to assign IP
addresses to the detected cameras.
