36
Note:
• Other users currently accessing the recorder will
forcibly be logged out. They need to log in to the
recorder again after the measurement.
• The result value is the reference value. Depending
on the network traffic, different result value may be
displayed even when the [Measurement] button is
clicked without changing any setting. Depending on
the network traffic or other causes, the following
may occur.
• Live images are not transmitted as configured
• Images are not recorded as configured
• Response of the web browser becomes slow
• The web browser is disconnected.
• Recording cannot be performed
We make no guarantee for any damages incurred by
recording malfunction or error occurrence regard-
less of what the cause may be.
SD memory rec.
Function featured in some Panasonic's cameras that
saves images on the SD memory card on the camera
when communication with the camera failed in the peri-
od set for the schedule recording of the recorder.
Recording rate setting
The SD memory recording is available only when the
camera has this function and "M-JPEG" is selected for
compression type of the "Model/Compression" setting
on the setup menu of the recorder.
The recording rate of the SD memory recording can be
set for each camera channel. (Page 43)
The start time of the SD memory recording varies
depending on the set recording rate.
The recording rate for "SD memory rec." should be less
than the recording rate set for the emergency recording.
Note:
• When setting the recording rate of the SD memory
recording, make sure that "Use" is selected for the
"SD memory card" setting of the camera. When
"Not use" is selected for the "SD memory card" set-
ting of the camera or when no SD memory card is
inserted in the SD memory card slot of the camera
(including imperfect insertion), the error message
will be displayed several times a day and images
may not be recorded for around 20 seconds during
the error message display.
Obtain image recorded on the SD memory card
It is possible to obtain images recorded on the SD
memory card of the camera and save them on the hard
disk drive of the recorder.
It is also possible to check if images are currently being
obtained or not in the "Status display".
Images on the SD memory card will be obtained at the
following time.
At a quarter past the hour (0:15, 1:15 … 23:15)
Important:
• When the communication between the camera and
the recorder is disconnected during an emergency
recording, images will be saved on the SD memory
card of the camera at the set recording rate.
• If receiving an alarm signal that triggers an emer
-
gency recording or getting to the start time of the
schedule recording when the communication
between the recorder and the camera is not estab-
lished, the SD memory recording will not be per-
formed.
• Do not set the recording rate of the SD memory
recording for the same camera with multiple record-
ers.
• The recording time of the obtained recorded images
(SD memory data) will be displayed based on the
clock of the camera. It is recommended to synchro-
nize the time and date of the cameras and the
recorder using the NTP server, etc. When the time
and date of the cameras and the recorder are no
synchronized, the SD memory recording may some-
times fail.
• When performing the emergency recording after
changing the recording conditions of multiple cam-
eras, start of recording may be delayed up to 6 sec-
onds (when performing recording images from 64
cameras simultaneously).
