manualshive.com logo in svg

Panasonic VR2 Series, Руководство по эксплуатации, Страница: 62 / 236

Поделиться
Скачать
Panasonic VR2 Series Скачать руководство пользователя страница 62

 

 

6-1

6.  Useful file edit functions 

While editing files turn off the 

 

Robot 

motion OFF

icon lamp to operate the cursor in the edit screen.

 

 

6-1.   Cut 

It removes data of the selected line(s) from the file and move to the clipboard. 

1.  Move the cursor to the line you want to delete. 
 
2.  Use the jog dial to select (highlight) the range of lines you 

want to cut and click to specify the range.

 

 

3. 

Click 

>> 

 

Edit 

>>

 

Cut 

 

 

 

Then a message to confirm the action appears. 

Î

 

[OK] 

To cut the highlighted data. 

[Cancel]

 To cancel the Cut action. 

[More]

 To return to the previous operation to specify another line 

to cut. 

 

· 

Clipboard is a temporary storage of character-string data to be used when moving or copying the data. 

· 

If you want to insert the data you have just cut to a different place or file, do 

Paste

. 

· 

The character-string data in the clipboard will be stored until execution of the next 

Cut

 operation.

 

 
 
 

6-2.   Copy 

It stores data of the selected line(s) in the clipboard. 
1.  Move the cursor to the line you want to copy. 
 
2.  Use the jog dial to select (highlight) the range of lines you 

want to copy and click to specify the range. 

 

3. 

Click 

>> 

 

Edit 

>>

 

Copy 

 

 
 

 

Î

 

 

[OK] 

To copy the highlighted data. 

[Cancel]

 To cancel the Copy action. 

[More]

 To return to the previous operation to specify another line 

to copy. 

 

· 

If you want to insert the data you have just copied to a different place or file, do Paste. 

· 

The character-string data in the clipboard will be stored until execution of the next 

Copy

 operation.

 

 

Содержание VR2 Series













































































































































































































































Отзывы:

Нет отзывов