manualshive.com logo in svg

Panasonic VR2 Series, Руководство по эксплуатации, Страница: 41 / 236

Поделиться
Скачать
Panasonic VR2 Series Скачать руководство пользователя страница 41

 

 

4-20

4-14.   Program test 

 
The program is tested in TEACH mode by performing robot motion and actual welding under the safety condition. 

And the override operation is available from the software “J” and later version. 

Functions 

• 

Actual welding is available to test. 

• 

The robot moves in accordance with the program under the safety condition of TEACH mode, and executes all 
robot commands including CALL and PARACALL commands. 

• 

Synchronnized dual robots motion is available to test. 

 

 

AUTO mode 

Program Test 

TEACH mode 

Turn the Mode switch

. 

ON/OFF

Mode switch 

 

Program Test

Turn the Mode switch

. 

 
 
 

Note 

Safety condition of TEACH mode: 

• 

Restricted arm speed defined in 
Speed limit setting. 

• 

The deadman key is effective. 

• 

The door stop switch is not 
effective. 

Note 

• 

Operational details of the Program Test are set in the Advanced settings. 

• 

When the Mode switch is changed to AUTO during Program Test, the operation will go into the AUTO mode with same 
robot arm position. 

• 

Even if the Mode switch is changed to AUTO from PROGRAM TEST and is returned to TEACH again, the operation is 
not returned to PROGRAM TEST. It will go normal TEACH mode.

 

 

4-14-1.  Procedures 

Turn on

 

Program Test 

icon to operate the Program Tset.

The Progra Test is operated with Function keys and the User function keys in the Teach box. 
 
 

Fuction keys 

Single hand 

Both hands 

1 

 

Test Run 

 

PROGRAM TEST is started and kept while 
pressing the key. 

PROGRAM TEST is started and kept while 
pressing both this key and the jog dial. 

2 

−

 

 

3 

 

Program Test 

 

Press the key to finish the Program Test operation. 

4 

−

 

 

 

User fuction keys 

 

Note 

• 

When Arc-test is set to 

Invalid

 in the advanced setting, 

(Arc lock) icon is not displayed. 

• 

(Gas

･

Wire) icon is pressed in the test, It finishes the Program Test. The operation does not change to “GAS 

Wire” operation. 

• 

When 

 or 

(Program change) are pressed in the test, each function becomes effective in the Program 

Test. 

• 

The user function keys of the Program Test are no customized keys. 

• 

Handling software does not show 

 and 

 icons. 

 

Содержание VR2 Series













































































































































































































































Отзывы:

Нет отзывов