manualshive.com logo in svg

Panasonic VR2 Series, Руководство по эксплуатации, Страница: 53 / 236

Поделиться
Скачать
Panasonic VR2 Series Скачать руководство пользователя страница 53

 

 

4-32

4-20.   File properties 

4-20-1.  File properties 

 
It provides information particular to each file, for example, when it was saved or who create the file. 
It also provides a place for you to add a comment. 
 

Click 

>> 

>>

 

File 

>>

 

Properties 

>>

Properties

 

 

 

Î

 

 

 

Specify a file you would like to see the properties of. 
 
 
 

[Program name]:

 Specified program file name. 

[Comment]:

 You can add a comment using up to 30 characters.

[Mechanism]:

 Applied mechanism.   

“0” indicates the newly added axis. 

[Program size]:

 File size 

[Creator (User ID)]:

 User ID who created the program 

[Created]:

 Date when the file was first saved. 

[Modified]:

 Data when the file was saved last. 

[Original program]:

 The original file name if the file was save 

using “Save as” or was renamed. 

[Program edit]:

 Current file protect state 

[Protected]: 

Current protect level. 

[OK]:

 Click to update the Command and/or Mechanism. 

 
 
 

4-20-2.   Rename a file 

You can change the name of a file without changing contents of the file. 

 

Click 

>> 

 

File 

>>

Properties 

>>

 

Rename 

 

 

•

 

  From the file list, select the file you want to rename. 

 

 

 

[The file name]:

 Type a name for the specified file.   

The file name can have up to 28 characters. 

[OK]:

 to update the file name.

 

 

 
 
 
 

Содержание VR2 Series













































































































































































































































Отзывы:

Нет отзывов