56
LAN
When using the computer as a network computer, some additional settings may have to
be made depending on the usage conditions. We recommend asking your system ad-
ministrator or the person in charge of the network.
Do not enter either the standby or hibernation mode during communications.
Unable to connect to network (When the indicator of your HUB unit does not
light):
Windows 98
1
Select [Network] in [Start] - [Settings] - [Control Panel].
2
Select [Realtek RTL8139/810X Family PCI Ethernet NIC].
3
Select [Properties].
4
Select [Advanced].
5
Confirm the settings of each items.
Windows 2000
1
Select [Device Manager] in [Star t] - [Settings] - [Control Panel] - [System] -
[Hardware].
2
Select [Realtek RTL8139 Family PCI Ethernet NIC] from [Network adapters].
3
Select [Action] - [Properties]
4
Select [Advanced].
5
Confirm the settings of each items.
1
Select [Device Manager] in [Start] - [Settings] - [Control Panel]
- [System]
2
Select [Realtek RTL8139/810X Family PCI Ethernet NIC] in [Net-
work adapters], then select [Properties]
3
Delete the check mark for [Disable in this hardware profile],
select [OK]
4
Restart the computer
Using the Computer as a Network Computer
Using LAN
Windows 98
Windows 2000
Setting LAN
Windows 98
Windows 98
Windows 2000
Windows NT
(
page 57
)
When using the LAN, set [LAN] to [Enable]* in the Setup Utility. (* Default)
NOTE
