manualshive.com logo in svg

Panasonic S-100PU2E5A, Технические данные и руководство по обслуживанию

Panasonic S-100PU2E5A - технические данные и сервисное руководство бесплатно. Скачайте руководство с {ссылка на веб-сайт} для полной информации о продукте. Мануал доступен для загрузки по запросу, чтобы помочь вам с устранением неисправностей и обслуживанием продукта.

Поделиться
Скачать
background image

1-67

1

1

CZ-KPU3

CAUTION

 

●

Never place the panel face-down. 
Either hang it vertically or place it on top of a 
projecting object. Placing it face-down will damage 
the surface.

 

●

Do not touch the flap or apply force to it. 
(This may cause flap malfunction.)

Flap

How to Install the Panel for Cassette

(1) Removing the air-intake grille
 

1)  Remove the 2 screws on the latch of the air-intake 

grille. (Reattach the air-intake grille after installation of 
the panel for cassette.)

  2)  Slide the air-intake grille catches in the direction 

shown by the arrows 

1

 to open the grille. 

1

1

Hinges of air-intake grille

Panel for cassette

Screw

Latch

Air-intake grille 

  3)  With the air-intake grille opened, remove the grille 

hinge from the panel for cassette by sliding it in the 
direction shown by the arrow 

2

. (Reattach the air-

intake grille after installation of the panel for cassette.)

2

■ 

4-Way Cassette Type (Type U2)

Accessories

Panel for cassette ×1

Screws ×4

4 × 12

Preparation for Panel for Cassette Installation

(1) Checking the unit position
 

1)  Check that the ceiling hole is within this range:

860 mm × 860 mm to 910 mm × 910 mm

 

2)  Confirm that the position of the indoor unit and the 

ceiling as shown in the diagram. If the positions of 
the ceiling surface and unit do not match, air leakage, 
water leakage, flap operation failure, or other problems 
may occur.

Main unit

Ceiling side

Ceiling opening 

dimension

A

A  :  Be sure to necessarily make a space within the range of 

12 mm ~ 17 mm.

If not within this range, malfunction or other trouble may occur.

281258_EU.indb   19

2016-9-1   13:03:54

(2) Removing the corner cover
 

Push the latches on the corner cover in the direction of 
the arrow 

1

 and remove them by sliding in the direction 

of the arrow 

2

.

2

1

1

(3) Installing the panel for cassette
 

The power must be turned ON in order to change the 
flap angle. (Do not attempt to move the flap by hand. 
Doing so may damage the flap.)

 

1)  Hang the temporary latches on the inside of the panel 

for cassette to the receptacle on the unit to temporarily 
attach the panel for cassette in place.

 

●

The panel for cassette must be installed in the correct 
direction relative to the unit. Align the REF. PIPE and 
DRAIN marks on the panel for cassette corner with 
the correct positions on the unit.

 

●

When removing the panel for cassette, push the 
temporary latches outward while holding the panel for 
cassette. 

Receptacle on the 

main unit

Push to disengage.

Temporary latch

Temporary latches (×2)

 

2)  Align the panel installation holes and the unit screw holes.

 

3)  Tighten the provided washer head screws at the 

4 panel installation locations so that the panel is 
attached tightly to the unit. 

Corner cover

Corner cover

Push latches upward 

to disengage.

Panel for cassette

Strap

 

4) Check that the panel is attached tightly to the ceiling. 

 

●

At this time, make sure that there are no gaps 
between the unit and the panel for cassette, or 
between the panel for cassette and the ceiling surface. 

 

●

If there is a gap between the panel and the ceiling, 
leave the panel for cassette attached and make fine 
adjustments to the installation height of the unit to 
eliminate the gap with the ceiling. 

CAUTION

 

●

If the screws are not sufficiently tightened, trouble 
such as that shown in the figure below may occur. 
Be sure to tighten the screws securely.

 

●

If a gap remains between the ceiling surface and the 
panel for cassette even after the screws are tightened, 
adjust the height of the unit again.

Make fine adjustment by a wrench or 

other tools to the installation height 

of the unit to eliminate the gap with 

the ceiling through the holes of the 

corner cover.

Do not allow gaps.

Panel for cassette

Main unit

Ceiling surface

Drain tube corner

Refrigerant tube 

corner

Marking with DRAIN 

Marking with REF. PIPE

Washer head screws 

(preinstalled on the 

panel for cassette)

Panel for cassette

Air leakage

Staining

Air leakage 

from panel for cassette

Condensation, water leakage

Adjust so that there 

are no gaps.

If there is no affect to the horizontal of the unit and 

drain tube, adjustment to the installation height of the 

unit can be made through the hole of the panel for 

cassette corner.

281258_EU.indb   20

2016-9-1   13:03:59

SM830252-01_欧州_Single_8・10HP_TD_SM.indb   67

16/10/14   13:57:40

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Содержание S-100PU2E5A





























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-100PU2E5A

Datavideo DAC-50 Quick Start Manual preview
DAC-50
Бренд: Datavideo Страницы: 18
Kramer VM-2HxI User Manual preview
VM-2HxI
Бренд: Kramer Страницы: 14
JTS UA-960 Instruction Manual preview
UA-960
Бренд: JTS Страницы: 8
Optical Systems OSD2052P Operator'S Manual preview
OSD2052P
Бренд: Optical Systems Страницы: 2
B&B Electronics EIR*-S series Quick Installation Manual preview
EIR*-S series
Бренд: B&B Electronics Страницы: 3
Planet IGT-1205AT User Manual preview
IGT-1205AT
Бренд: Planet Страницы: 36
Patton electronics 2020RC User Manual preview
2020RC
Бренд: Patton electronics Страницы: 16
Cross Technologies 2016-95 Instruction Manual preview
2016-95
Бренд: Cross Technologies Страницы: 18
Climax CL-AB-RF-W Installation Manual preview
CL-AB-RF-W
Бренд: Climax Страницы: 2
Kohler 4EFCD-Low CO Service Manual preview
4EFCD-Low CO
Бренд: Kohler Страницы: 88
Hautespot HauteSHOT microNVR video processing platform User Manual preview
HauteSHOT microNVR video processing platform
Бренд: Hautespot Страницы: 30
Clarke DG6000DVES Operation & Maintenance Instructions Manual preview
DG6000DVES
Бренд: Clarke Страницы: 36
Advantech EKI-2541M/SC User Manual preview
EKI-2541M/SC
Бренд: Advantech Страницы: 28
Kaco blueplanet XP10U-H4 PSD Instruction Manual preview
blueplanet XP10U-H4 PSD
Бренд: Kaco Страницы: 53
Ross GearLite SMC-9901 User Manual preview
GearLite SMC-9901
Бренд: Ross Страницы: 24
Fronius 10.0-3 208-240 Installation Instructions Manual preview
10.0-3 208-240
Бренд: Fronius Страницы: 68
B+B SmartWorx FOSTCDRi-PH-MT Quick Start Manuals preview
FOSTCDRi-PH-MT
Бренд: B+B SmartWorx Страницы: 2
Crestron DM-NVX-E760 Product Manual preview
DM-NVX-E760
Бренд: Crestron Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды