manualshive.com logo in svg

Panasonic S-100PU2E5A, Технические данные и руководство по обслуживанию

Panasonic S-100PU2E5A - технические данные и сервисное руководство бесплатно. Скачайте руководство с {ссылка на веб-сайт} для полной информации о продукте. Мануал доступен для загрузки по запросу, чтобы помочь вам с устранением неисправностей и обслуживанием продукта.

Поделиться
Скачать
background image

7

7

7-2. List of Simple Setting Items

Item code

Item

Setting data

No.

Description

Filter sign ON time 

(filter life time)

0000 Not displayed
0001 150 hours
0002 2,500 hours
0003 5,000 hours
0004 10,000 hours
0005 Use the filter clogging sensor.

Degree of filter fouling

0000 Standard (setting at time of shipping)

0001

Highly fouled 
(Filter sign ON time is reduced to one-half the set time.)

Central control 

address

0001 Central control address 1
0002 Central control address 2
0003 Central control address 3

0064 Central control address 64
0099 No central control address set (setting at time of shipping)

Operating mode 

priority change

0000 Normal ( setting at time of shipping)
0001 Priority

Fan speed when 

heating thermostat is 

OFF

Compressor ON

Compressor OFF

0000

Lo 1 min., LL 3 min.

LL

0001

Lo

LL

0002

LL

LL

0004

Lo 1 min., LL 3 min.

Lo

0005

Lo

Lo

0006

LL

Lo

Heating intake 

temperature shift

0000 No shift
0001 Shifts intake temperature 1 °C down.
0002 Shifts intake temperature 2 °C down.
0003 Shifts intake temperature 3 °C down.
0004 Shifts intake temperature 4 °C down.
0005 Shifts intake temperature 5 °C down.
0006 Shifts intake temperature 6 °C down.

Electric heater 

installation

0000 No heater
0001 Heater installed

Humidifying when 

heater thermostat is 

OFF

0000 No (setting at time of shipping)

0001 Yes

Permit/prohibit  

automatic 

heating/cooling

0000 Permit

0001 Prohibit

Cool-only

0000 Normal
0001 Cool only (Set “1” for item code OD.)

NOTE

• 

In order to avoid water leakage and damage to the fan, do not set for humidifying when the thermostat is OFF 
unless a vaporizing humidifier is used.

• 

Consider the device purpose and type when changing the settings. Incorrect settings may result in malfunction.

• 

Do not change any setting data that does not appear in this list.

Optional Controller 

Remote Controller Functions

5. Detailed Settings Function

A

°

°

“              ”, unit No. “           ”, item code “    ,” and
settings data “            ” are displayed blinking on the
remote controller LCD display (Fig. 7-3). At this time,
the indoor unit fan begins operating.

This allows the system address, indoor unit address, and other settings to be made for the individual or
group-control indoor unit to which the remote controller used for detailed settings is connected.
When detailed settings mode is engaged, operation stops at the individual or group-control indoor unit where the
remote controller used for detailed settings is connected. Simple settings items can also be set at this time.

Press and hold the        ,        and        buttons
simultaneously for 4 seconds or longer.

If group control is in effect, press the        button and
select the address (unit No.) of the indoor unit to set.
At this time, the fan at the indoor unit begins operating.

*If unit No. “           ” is displayed, the same setting
  will be made for all indoor units.

Press the temperature setting        /       buttons to
select the item code to change.
Press the timer time        /        buttons to select the
desired setting data.
*For item codes and setting data, refer to the
  following page.

Press the        button. (The display stops blinking
and remains lit, and setting is completed.)
Press the        button to return to normal remote
controller display.

(7)

(1)

(6)

(3)

(2)

(4)

(5)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

7-4

SM830252-01_欧州_Single_8・10HP_TD_SM.indb   4

16/10/13   11:02:00

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Содержание S-100PU2E5A





























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-100PU2E5A

G-Lab M4L User Manual preview
M4L
Бренд: G-Lab Страницы: 16
Parker LCMS-5000 Installation, Operation And Maintenance Manual preview
LCMS-5000
Бренд: Parker Страницы: 36
Srne HF4825U80-145 User Manual preview
HF4825U80-145
Бренд: Srne Страницы: 38
B&B Electronics McLIM TP-TX/FX User Manual preview
McLIM TP-TX/FX
Бренд: B&B Electronics Страницы: 13
Growatt 10000UE Installation & Operation Manual preview
10000UE
Бренд: Growatt Страницы: 45
Snell & Wilcox HD5050 Operator'S Manual preview
HD5050
Бренд: Snell & Wilcox Страницы: 51
Somogyi Elektronic Home MX 202 Instruction Manual preview
Home MX 202
Бренд: Somogyi Elektronic Страницы: 10
Goobay 60267 User Manual preview
60267
Бренд: Goobay Страницы: 24
Canary CLE-106X Specifications preview
CLE-106X
Бренд: Canary Страницы: 3
Tripp Lite PowerVerter RV Inverter/Charger RV1012ULHW Specifications preview
PowerVerter RV Inverter/Charger RV1012ULHW
Бренд: Tripp Lite Страницы: 5
Veikong VFD700-PV-40T00075 Operation Manual preview
VFD700-PV-40T00075
Бренд: Veikong Страницы: 70
ELECTROCOMPANIET RENA S-1 Quick Start Manual preview
RENA S-1
Бренд: ELECTROCOMPANIET Страницы: 16
Samlexpower SDC-23 Owner'S Manual preview
SDC-23
Бренд: Samlexpower Страницы: 3
Patton electronics 2017RC User Manual preview
2017RC
Бренд: Patton electronics Страницы: 20
Tripp Lite PVINT375 Owner'S Manual preview
PVINT375
Бренд: Tripp Lite Страницы: 24
Kohler 11EFKOZD Installation Instructions Manual preview
11EFKOZD
Бренд: Kohler Страницы: 12
Mastervolt MASS COMBI PRO Installation Manual preview
MASS COMBI PRO
Бренд: Mastervolt Страницы: 22
Harman AMX N2400 Series Instruction Manual preview
AMX N2400 Series
Бренд: Harman Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды