manualshive.com logo in svg

Panasonic S-100PU2E5A, Технические данные и руководство по обслуживанию

Panasonic S-100PU2E5A - технические данные и сервисное руководство бесплатно. Скачайте руководство с {ссылка на веб-сайт} для полной информации о продукте. Мануал доступен для загрузки по запросу, чтобы помочь вам с устранением неисправностей и обслуживанием продукта.

Поделиться
Скачать
background image

8

8

Control of 2WAY SYSTEM

8-15. CZ-RWSC3

2. Wireless Remote Controller

OPERATION
TIMER
STANDBY
FILTER

Installation Instructions

Wireless Receiver for ALL

(1) Light receiving section

Receives signals.

(2) Emergency operation button

Starts/Stops emergency operation.

(3) Indication lamp

Indicates operation status.

Supplied accessories

Wood screw

M4 × 15.5

(2)

Clamper

(1)

Part Names

Safety Precautions

Read before installation

Read the Installation Instructions carefully to install the 

unit correctly and safely. 

Be sure to read the Safety Precautions in particular 

before installation.

After the installation is complete, perform test operation 

to confirm that no abnormality is present.

We assume no responsibility for accidents or damages resulting 

from methods other than those described in the installation 

instructons or methods without using specified parts.

Malfunctions that occurred due to the unauthorised installation 

methods are not covered by the product warranty.

Read the installation instructions supplied with indoor units as well.

 WARNING

This symbol refers to a hazard or 

unsafe practice which can result in 

severe personal injury or death.

 CAUTION

This symbol refers to a hazard or unsafe 

practice which can result in personal injury 

or product or property damage.

 WARNING 

•

 Turn off the circuit breaker of 

the units before installation.

•

 Ask your dealer or 

professionals for installation 

and electric work.

•

 This receiver shall be installed 

in accordance with National 

Wiring Regulations.

•

 Securely connect and fix the

•

 Do not allow the connection 

to be exposed to the external 

that sufficiently supports the

specified cables for wiring.

force of the cables.

•

 Choose an installation location 

weight of the receiver.

1. Accessories

 CAUTION 

Do not use at the following locations.

•

Location where condensation occurs

•

•

Location where corrosive gases, etc. may leak

Location where voltage fluctuation frequently 

Location where flammable gases, etc. may leak

•

Location with lots of water or oil droplets 

(including machine oil)

•

occurs

•

Location where there is a machine producing 

electromagnetic radiation

•

Location where droplets of organic solvents 

spread

Location where acidic or alkaline solutions or 

special sprays are frequently used

Do not operate with wet hands.

Do not wash with water.

Dimensions

70

4.4

4.4

2.

81

3.

81

83.5

20

120

34.4

8

5.4

Unit: mm

14

9.4

12

Control of 2WAY SYSTEM

2. Wireless Remote Controller

2. Installing the Receiver

1

Remove the bottom case.

Attention

Mounting the bottom case

Tighten the screws securely until the screw 
heads touch the bottom case. 
(Otherwise, loose screw heads may hit the 
PCB and cause malfunction when mounting 
the top case.)

Do not over-tighten the screws. 
(The bottom case may be deformed, resulting 
in fall of the unit.)

Connecting the remote controller wiring

Arrange the wires as shown in the illustration for (2) in step 2,
avoiding unnecessary wires being stored in the case. (Caught 
wires may destroy the PCB.)

Avoid wires touching parts on the PCB. 
(Caught wires may destroy the PCB.)

Flat-blade

screwdriver

Bottom

case

Insert the driver 

and slightly turn.

2

Mount to the wall.

e

p

y

t

d

e

d

d

e

b

m

E

e

p

y

t

d

e

s

o

p

x

E

Preparation:  Make 2 holes for screws using a driver.

Preparation:  Make 2 holes for screws using a driver.

(1)

(3)

(2)

Cut here with a 

nipper and remove 

the burr with 

.e

l if

 a

Mount the top case.

Align the claws of 

the top case and 

then align the claws 

of the bottom case.

Mount the bottom case 

to the wall.

Connect the remote controller wiring.

Arrange the wires along the groove of the case.

Wood screw (supplied)

Claw

Hole for screw

 

e

h

t 

x

 if

 

o

t 

ll

a

W
receiver

Claw (2 places)

Top case
(Back side)

Remove the coating. Approx. 6 mm

Remove the sheath. Approx. 150 mm

Make sure the wiring connection 

is in the correct direction.

Clamper

(supplied)

Pass through 

the hole.

Bottom case (Back side)

(1)

(3)

Avoid the wire 

being caught.

Mount the top case.

Align the claws of 

the top case and 

then align the claws 

of the bottom case.

Mount the bottom case to 

the wall.

Pass the wire through the hole 

in the centre of the bottom case.

Connect the remote controller wiring.

Wood screw (supplied)

Claw (2 places)

Claw

Hole for screw

Terminal board

Bottom case (Back side)

Remove the coating.

Approx. 6 mm

Make sure the wiring connection 
is in the correct direction.

Top case
(Back side)

(2)

8-17

SM830252-01_欧州_Single_8・10HP_TD_SM.indb   17

16/10/12   15:51:27

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Содержание S-100PU2E5A





























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-100PU2E5A

Underhill Novo Operation Manual preview
Novo
Бренд: Underhill Страницы: 30
Schwarzbeck IGUF 2910 S Manual preview
IGUF 2910 S
Бренд: Schwarzbeck Страницы: 6
Magtek MT-95 Installation And Operation Manual preview
MT-95
Бренд: Magtek Страницы: 54
Black Box LIC022A-R2 Manual preview
LIC022A-R2
Бренд: Black Box Страницы: 16
Extron electronics CVC 300 Installation Manual preview
CVC 300
Бренд: Extron electronics Страницы: 8
Elettronica Santerno SINUS CABINET K Series Programming Manual preview
SINUS CABINET K Series
Бренд: Elettronica Santerno Страницы: 226
Wacker Neuson FUE 6 Operator'S Manual preview
FUE 6
Бренд: Wacker Neuson Страницы: 36
Panduit ATLONA OmniStream 101 Manual preview
ATLONA OmniStream 101
Бренд: Panduit Страницы: 147
Harmonic ProView PVR 6000 Series User Manual preview
ProView PVR 6000 Series
Бренд: Harmonic Страницы: 269
Enerdrive eePRO combi Installation Manual preview
eePRO combi
Бренд: Enerdrive Страницы: 2
W&T 81215 Manual preview
81215
Бренд: W&T Страницы: 12
BSPH SH-360 Operation Manual preview
SH-360
Бренд: BSPH Страницы: 36
Portable Power Technology SN-BT Series Instruction Manual preview
SN-BT Series
Бренд: Portable Power Technology Страницы: 4
PRO SIGNAL PSG3033 Quick Start Manual preview
PSG3033
Бренд: PRO SIGNAL Страницы: 2
ILX Lightwave TSC-599 User Manual preview
TSC-599
Бренд: ILX Lightwave Страницы: 16
3onedata IPMC100 Series Quick Installation Manual preview
IPMC100 Series
Бренд: 3onedata Страницы: 2
Fronius Autotransformer MW 1700 Fitting Instructions, Spare Parts List preview
Autotransformer MW 1700
Бренд: Fronius Страницы: 15
Dass Soleaf DSP-123JB-OD Operation And Installation preview
Soleaf DSP-123JB-OD
Бренд: Dass Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды