Panasonic PV-500, Руководство пользователя

Страница: 52 / 494

50
B
asi
c O
p
er
at
io
n
C
h
ap
te
r
3
Deleting a Vertex of Polygon
1.
Select "Change".
2.
Press the ENTER key repeatedly until the vertex you want to delete turns to be modifiable (the
square is on the vertex).
3.
Press the FUNC key.
The menu adding/deleting vertices is displayed.
4.
Select "Delete Vertex".
The vertex you selected is deleted.
The square mark shifts to the previous vertex. Press the
ENTER key and adjust vertices
Line Scan
1.
Select “Line” from “Change Shape” menu.
2.
Select "Change".
Now you can draw an area.
3.
Move the area.
Tilt the ENTER key to move the area.
Tilt the ENTER key pressing the SHIFT key to move the area by 10-pixel.
(You can use the SHIFT key also in setting of a start/end point.)
4.
Set the start point (a square mark).
Move the start point by tilting the ENTER key and press it to determine the
position.
5.
Set the end point (a filled square mark).
Move the end point by tilting the ENTER key and press it to determine the
position.
Modifying an Inspection Area (when adding a mask
area)
When a mask area is set, the inspection area to edit is needed to select.
1.
Select "Change".
The inspection area is displayed in orange.
Tilt the ENTER key upward/downward to display the area you want to edit in orange and press the ENTER
key. The area will be modifiable.
2.
Press the ENTER key to select the inspection area.
3.
Edit the inspection area.
4.
After editing is completed, press the CANCEL key.