Panasonic PV-500, Руководство пользователя

Страница: 141 / 494

139
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
INDE
X
In the case of Area Shape = “Plane”
1
. Set a start point and an end point.
Set a start point (STX, STY) and an end point
(EDX, EDY). PV scans from the start point to
the end point.
If the scan direction is set to
“Horizontal/Vertical”, PV scans in both
directions.
2
. Set the size of a cell which is a rectangle
calculating the average brightness.
Scan direction: Horizontal Scan direction: Vertical
3
. Set the number of cells.
Settable number of cells:
- Number of cells X = 3 - 256
- Number of cells Y = 3 - 256
Set the number of cells in order to inspect the
object thoroughly from the start point to the end
point in both directions of X and Y, and not to
overlap cells each other as the figure shown on
the right. If the cells overlap each other, the
checker repeatedly scans the parts where the
cells are overlapping, resulting in increasing
inspection time.
Changed area size by Area Size Adjustment
function does not change the number of cells.
Specify the number of cells in order to inspect
thoroughly even if an area size will become
larger.
The lower figure is an example of occurrence of area
that cannot be inspected due to lack of cells.
X
(Left/right key of the
keypad). Y
(Up/down key of the
keypad).
ST X coordinate of the
start point Y coordinate of the
start point
ED X coordinate of the
end point Y coordinate of the
end point
W Width-X of cell Width-Y of cell
N Number of cells in X Number of cells Y