Panasonic PV-500, Руководство пользователя

Страница: 218 / 494

216
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
List of Settable Items for Each Object
Point All Points Line
PAC: Position Adjustment
○
Base Position Coord.
Detect Position Coord.
Base Coord. (Detect
Coord. of Base
Checker)
× ×
AUC: Area Size
Adjustment ○ × ×
BEC: Binary Edge
○ ○ ×
GEC: Gray Edge
○ ○ ×
FEC: Feature Extraction ○
Center of Gravity
Coord.
Circumscribing
Rectangle Coord.
(Upper left, Upper right,
Lower left, Lower right)
○
(Center of Gravity
Coord.)
×
SMC: Smart Matching
○ ○ ×
FWC: Flaw Detection ○ ○ ×
CGE: Connector (Gray
Edge)
○
Area 0
Area 1 (*a
○ ×
SEC: Smart Edge (Circle) ○
Center Coord. 0
Center Coord. 1 (*b
Cell Individual Result 0
Cell Individual Result 1
(*c
○
Cell Individual Result
0
Cell Individual Result
1 (*c
×
SEL: Smart Edge (Line)
○
Max. Measurement
Coord.
Min. Measurement
Coord.
Line0 Start Coord.
Line0 End Coord.
Line1 Start Coord. (*b
Line1 End Coord. (*b
Cell Individual Result 0
Cell Individual Result 1
(*b
○
Cell Individual Result
0
Cell Individual Result
1 (*b
○
Line0 Element
Line1 Element (*b
GGC: Geometry
Calculation
○
(*d
× ○
(*d (*e
*a) When selecting "Gap", "Float" or "Width Measurement" in Execution Mode
*b) When selecting "Measure Width" in Detect Mode
*c) When selecting "Measure Width" or "Measure Diameter" in Detect Mode
*d) Available only for the geometry calculations of the smaller numbers than the currently setting geometry
calculation
*e) Normally operation can be performed only with the following types which calculate line elements (abc):
Distance Point - Point / Median of Tow Lines / Distance Point - Line / Approximate Line
The checker with a camera number different from that selected for the setting geometry calculation cannot be
specified.