Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство)

Страница: 224 / 233

Chapter 7 Appendix — Specifications
224 - ENGLISH
Remote
control
Power supply DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102
]
(3.6 ozs.) (including batteries)
Dimensions Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 The lens for PT-MZ770L, PT-MZ770LB, PT-MZ770LA, PT-MW730L and PT-MW730LA is sold separately.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*3 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*4 When the Zoom Lens (Model No.: ET-ELW22) is used, the projected image size is 1.524 m (60") to 10.160 m (400").
*5 Average value. Weight varies for each product.
*6 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level.
The light output may decrease to protect the projector when the operating environment temperature exceeds 36 °C (96.8 °F).
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
r
Connecting terminal
<RGB 1 IN> terminal
1 set, BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
) x 1
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<MONITOR OUT> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, positive/negative polarity
VD TTL high impedance, positive/negative polarity
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<HDMI 1 IN> terminal
<HDMI 2 IN> terminal
Total 2 sets, HDMI 19 p, HDCP compatible
*1
, Deep Color compatible
Audio signal
Linear PCM (sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<VIDEO IN> terminal 1 set, pin jack, 1.0 V [p-p] 75 Ω
<AUDIO IN 1> terminal
<AUDIO IN 2> terminal
Total 2 sets, M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ or more
<AUDIO IN 3> terminal 1 set, pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT>
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible), 0 V [rms] to 2.0 V [rms] (variable), output
impedance 2.2 kΩ or lower
<SERIAL IN> terminal
D-Sub 9 p, 1 set, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal 1 set, D-Sub 9 p, for contact control
<REMOTE 2 IN> terminal 1 set, M3 stereo mini jack, for remote control (wired)
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink compatible,
100Base-TX, HDCP compatible
*1
, Deep Color compatible
<LAN> terminal 1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
<VIEWER/PAIRING> terminal
1 set, USB connector (type A), for Memory Viewer function/pairing function
<DC OUT> terminal USB connector (type A) x 1, for power supply (DC 5 V, maximum 2 A)
*1 PT-MZ770: HDCP 2.2 compatible; PT-MW730: HDCP compatible
r
Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: ET-WM300).
Compliance standards
IEEE802.11a/b/g/n
Transmission method DSSS, OFDM
Modulation method DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO