Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство)

Страница: 122 / 233

Chapter 4 Settings — [PROJECTOR SETUP] menu
122 - ENGLISH
[LB/W SERIES]
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78
series, LB75 series
[VX500 SERIES]
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330
series, VX400NT series, VX400 series, VX41 series
[EZ570 SERIES] EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D] VW431D series
6) Press the <ENTER> button.
f
The confirmation screen is displayed.
7) Press
qw
to select [OK], and press the <ENTER> button.
[REMOTE1 MODE]
Set the <REMOTE 1 IN> terminal.
1) Press
as
to select [REMOTE1 MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT] Uses pin assignment of the <REMOTE 1 IN> terminal in standard setting.
[USER]
Use this item when changing the setting of the <REMOTE 1 IN> terminal. (
x
page 219)
[F/W SERIES] Uses the <REMOTE 1 IN> terminal setting compatible with the F/W series.
f
Proceed to Step 3) when [USER] is selected.
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The [FUNCTION BUTTON] screen is displayed.
3) Press
as
to select a function.
[DISABLE] Disables the <FUNCTION> button.
[SUB MEMORY]
Displays the sub memory list. (
x
page 135)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x
page 89)
[DAYLIGHT VIEW] Switches the [DAYLIGHT VIEW] setting. (
x
page 88)
4) Press the <ENTER> button.
[LENS CALIBRATION]
Detect the lens shift limit value of the projector, and automatically set the home position.
1) Press
as
to select [LENS CALIBRATION].
2) Press the <ENTER> button.
f
The confirmation screen is displayed.
3) Press
qw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
f
The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position.
f
The lens stops to complete the lens calibration.
Note
f
[PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.