Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство), Страница: 105 / 233

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 105
f
The computer, video device, or projector in use may require the power to be turned off and on again after setting.
f
The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[DIGITAL LINK IN]
Set this item in accordance with the video signal input to the <DIGITAL LINK/LAN> terminal.
Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]
1) Press
as
to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
f
The [DIGITAL LINK IN] screen is displayed.
3) Press
as
to select [SIGNAL LEVEL].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940]
Select this item when the signal output from the HDMI terminal of an external device (Blu-ray disc
player, etc.) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
[0-1023]
Select this item when the signal output from the DVI-D terminal or HDMI terminal of an external
device (such as a computer) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable
transmitter.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f
The signal level is displayed for 30 bits of input.
Setting [EDID SELECT] in [DIGITAL LINK IN]
(Only for PT-MZ770)
1) Press
as
to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
f
The [DIGITAL LINK IN] screen is displayed.
3) Press
as
to select [EDID SELECT] of [DIGITAL LINK IN].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[4K/60p]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz, and YP
B
P
R
4:2:0 format only).
[4K/30p]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
[2K] Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
Note
f
Switch the setting to [4K/30p] when proper image is not projected while [EDID SELECT] is set to [4K/60p] and the 4K video signal is input.
f
Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p] or [4K/30p] and the 2K video signal or
lower is input.
f
For details of the signal described in EDID of [4K/60p], [4K/30p], or [2K], refer to “List of compatible signals” (
x
page 220).
Setting [EDID MODE] in [DIGITAL LINK IN]
1) Press
as
to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
f
The [DIGITAL LINK IN] screen is displayed.
3) Press
as
to select [EDID MODE].