Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство)

Страница: 66 / 233

Chapter 3 Basic Operations — Switching on/off the projector
66 - ENGLISH
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power <
v
/
b
> button.
f
The [POWER OFF(STANDBY)] confirmation screen is displayed.
2) Press
qw
to select [OK], and press the <ENTER> button.
(Or press the power <
v
/
b
> button again.)
f
Projection of the image will stop, and the power indicator <ON (G)/STANDBY (R)> on the projector body
lights in orange. (The fan keeps running.)
3) Wait for a few seconds until the power indicator <ON (G)/STANDBY (R)> of the projector body lights/
blinks in red.
4) Press the <OFF> side of the <MAIN POWER> switch to turn off the power.
Note
f
For approximately five seconds after the projector is turned off, the indicator does not light up even if the power is turned on.
f
Even when the power <
v
/
b
> button is pressed and the projector is switched off, the projector consumes power if the main power
of the projector is on.
When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], use of some functions is restricted,
but the power consumption during standby mode can be conserved.
f
While projecting, the power can be turned off by pressing the <OFF> side of the <MAIN POWER> switch, or by directly using the breaker
under conditions where the <MAIN POWER> switch of the projector cannot be switched off/on easily such as while installing on the ceiling.
However, the settings or adjustments performed right before the power is turned off may not be reflected.