Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство)

Страница: 51 / 233

Chapter 2 Getting Started — Attaching the Wireless Module
ENGLISH - 51
Attaching the Wireless Module
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: ET-WM300).
Attaching the Wireless Module
Fig. 2 Fig. 1
Wireless Module Wireless module
connecting terminal
Top slide cover attachment line
Wireless module fixing screw
Top slide cover fixing screw
Wireless module
attachment line
Top slide cover
1) Turn off the power of the projector.
f
Always follow the procedure of “Switching off the projector” (
x
page 66) when turning off the power.
2) Remove the top slide cover. (Fig. 1)
f
Turn the top slide cover fixing screw (x 1) counterclockwise until it turns freely using a Philipps screwdriver,
slide the top slide cover until the top slide cover attachment line is visible, and remove it.
3) Attach the Wireless Module. (Fig. 2)
i) Insert the Wireless Module into the wireless module connection terminal of the projector.
ii) Confirm that the edge of the Wireless Module is aligned to the wireless module attachment line, and securely
fix the Wireless Module with the fixing screw (x 1) supplied with the Wireless Module.
4) Attach the top slide cover. (Fig. 1)
f
Align the top slide cover to the top slide cover attachment line, and attach it by sliding.
f
Securely tighten the top slide cover fixing screw (x 1) using a Phillips screwdriver.
Attention
f
When tightening the screws, use a Phillips screwdriver or similar, and do not use power screwdriver or impact screwdriver.
f
Do not attach any USB device other than the optional Wireless Module (Model No.: ET-WM300).