Panasonic PT-MZ770, Инструкция по эксплуатации (Функциональное руководство), Страница: 112 / 233

Chapter 4 Settings — [DISPLAY OPTION] menu
112 - ENGLISH
Using the presentation timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select an item, and press the <ENTER> button.
[START] Starts the count.
[STOP] Stops the count.
[RESTART] Restarts the count.
[RESET] Resets the count.
[EXIT] Ends the presentation timer.
f
Elapsed time or remaining time is displayed in the bottom right of the projected image when [START] or
[RESTART] is selected.
f
The elapsed time or remaining time when it was stopped is displayed in the bottom right of the projected
image when [STOP] is selected.
Note
f
The presentation timer can be operated by the <P-TIMER> button on the remote control. (
x
page 76)
f
The security message set in the [SECURITY] menu → [DISPLAY SETTING] (
x
page 136) is not displayed while the elapsed time or
remaining time is displaying.
f
The elapsed time or remaining time is not displayed while the menu screen is displayed.
f
When [MODE] is set to [COUNT UP], the start time will be “000:00”.
f
When [MODE] is set to [COUNT DOWN], the start time will be the value set in [TIMER].
f
The timer gauge will turn clockwise when set to [COUNT UP], and turn counterclockwise when set to [COUNT DOWN].
[FREEZE]
The projected image is paused and audio is turned off regardless of the playback of the external device.
1) Press
as
to select [FREEZE].
2) Press the <ENTER> button.
f
Press the <MENU> button or the <RETURN> button to clear.
Note
f
[FREEZE] is displayed on the screen when video is paused.
f
Operation of [FREEZE] can also be performed with the <FREEZE> button on the remote control. (
x
page 73)
[DIGITAL ZOOM]
(When RGB signal for still images, HDMI signal for still images, or DIGITAL LINK signal for still images is input.
Or, when MEMORY VIEWER, Panasonic APPLICATION, or MIRRORING is input.)
1) Press
as
to select [DIGITAL ZOOM].
2) Press the <ENTER> button.
f
The [DIGITAL ZOOM] individual adjustment screen is displayed.
3) Press
qw
to adjust the magnification factor.
f
The magnification factor can be adjusted from 1.0 times to 3.0 times in 0.1 intervals.
4) Press the <ENTER> button.
f
The move screen is displayed.
5) Moving the enlargement area
f
For details, refer to “Using the digital zoom function” (
x
page 75).
Note
f
The digital zoom is canceled when the <AUTO SETUP/CANCEL> button on the remote control or the <LENS/CANCEL> button on the
control panel is pressed while performing the digital zoom.
f
The adjustment value of the digital zoom is canceled when the type of input signal is changed while performing the digital zoom.
f
The freeze function is disabled while performing the digital zoom.
f
The digital zoom will not operate in some of the still image signals.