Panasonic PT-MZ570, Руководство по эксплуатации

Страница: 193 / 229

Chapter 5 Operations — Projecting with MEMORY VIEWER input
ENGLISH - 193
Playing back using the contents list
When the [NETWORK/USB] menu → [MEMORY VIEWER] → [AUTOPLAY] is set to [SCENARIO], playback of
still image or movie and transmission of the Light ID signal are performed automatically following the setting of the
contents list saved in the USB memory. To transmit the Light ID signal, it is necessary to set the [PROJECTOR
SETUP] menu → [LightID] to [EXTERNAL CONTROL].
The contents list is generated with the “Multi Monitoring & Control Software”, and it can be saved in the USB
memory, etc. For details, refer to the Operating Instructions of “Multi Monitoring & Control Software”.
1) Insert the USB memory with the contents list saved into the <VIEWER/PAIRING> terminal.
f
For the handling of the USB memory, refer to “Using the USB memory” (
x
page 70).
2) Press the <NETWORK/USB> button to switch the input to MEMORY VIEWER.
f
Every time the <NETWORK/USB> button is pressed, the input will switch in the order of MEMORY
VIEWER, Panasonic APPLICATION, and MIRRORING. Press the <NETWORK/USB> button until the input
switches to MEMORY VIEWER.
f
Once the input is switched to MEMORY VIEWER, playback is repeated automatically following the setting
of the contents list.
3) Press the <NETWORK/USB> button to switch the input to anything other than MEMORY VIEWER to
end.
f
Once the input is switched to anything other than MEMORY VIEWER, playback using the contents list
ends.
Note
f
The contents list is the following 4 types of file. Generate it in advance using the “Multi Monitoring & Control Software”.
g
Scenario file specifying the playback order and time (scenario.dat)
g
File list summarizing the playback file names (filelist.dat)
g
Light ID definition file to specify the Light ID (lightid.dat)
g
Contents file to project movies and still images (jpg, mp4 etc.)
f
Nothing is played back, when the [NETWORK/USB] menu → [MEMORY VIEWER] → [AUTOPLAY] is set to [SCENARIO] and there is no
contents list in the USB memory, or there is defect in it.
f
Playback can also be stopped by setting the [NETWORK/USB] menu → [MEMORY VIEWER] → [AUTOPLAY] to anything other than
[SCENARIO].
f
Playback is suspended and the contents list is updated when the contents list is distributed using the “Multi Monitoring & Control Software”
during playback using the contents list. Once the update of contents list is completed, playback using the overwritten contents list resumes.