Panasonic PT-MZ570, Руководство по эксплуатации

Страница: 100 / 229

Chapter 4 Settings — [DISPLAY OPTION] menu
100 - ENGLISH
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub‑
menu.
Refer to “Navigating through the menu” (
x
page 80) for the operation of the menu screen.
[COLOR ADJUSTMENT]
Correct the color difference between projectors when using multiple projectors simultaneously.
1) Press
as
to select [COLOR ADJUSTMENT].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Does not perform the color adjustment.
[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE] and the white [GAIN].
[7COLORS]
Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].
3) Select [3COLORS] or [7COLORS], and press the <ENTER> button.
f
The [3COLORS] or [7COLORS] screen is displayed.
4) Press
as
to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] when [7COLORS] is selected).
5) Press the <ENTER> button.
f
The [3COLORS:RED] , [3COLORS:GREEN] , [3COLORS:BLUE] , or [3COLORS:WHITE] screen is
displayed.
When [7COLORS] is selected, the [7COLORS:RED] , [7COLORS:GREEN] , [7COLORS:BLUE] ,
[7COLORS:CYAN] , [7COLORS:MAGENTA] , [7COLORS:YELLOW] , or [7COLORS:WHITE] screen is
displayed.
f
By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
6) Press
as
to select [RED], [GREEN], or [BLUE].
f
Only [GAIN] can be adjusted when [WHITE] is selected for [3COLORS].
7) Press
qw
to adjust.
f
The adjustment value will change between 0
*1
and 2 048.
*1 The lower limit varies depending on the color to be adjusted.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projector
or by a service person.
f
Set [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.
f
Pressing the <DEFAULT> button on the remote control will restore the factory default settings for all items.
f
When [COLOR ADJUSTMENT] is set to anything other than [OFF], the [DISPLAY OPTION] menu → [COLOR CORRECTION] is fixed to
[OFF], and the [PICTURE] menu → [COLOR TEMPERATURE] is fixed to [USER].
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1) Press
as
to select [COLOR CORRECTION].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Standard setting
[USER]
For each of the four signal formats of VIDEO, RGB, and YC
B
C
R
/YP
B
P
R
, six colors of red, green, blue,
cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button and set the
details. Adjustment is possible within the range of - 31 to +31.