Panasonic PT-MZ570 Скачать руководство пользователя страница 25

Страница: 25 / 229

Chapter 1

Preparation — Precautions for use

ENGLISH - 25

When using a laser format bar code reader, take care not to illuminate the bar code reading surface with the

projection light or its reflected light. Doing so may cause bar code reader not to read or misread.

The Light ID function of the projector is not guaranteed to operate on all devices.

DIGITAL LINK

“DIGITAL LINK” is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted

pair cable by adding unique functions by Panasonic to the HDBaseT

communication standard formulated by

HDBaseT Alliance.
This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G,

ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-transmitters such as the “XTP

transmitter” of Extron Electronics) based on the same HDBaseT

standard. For the devices of other

manufacturers that the operation has been verified with this projector, visit the Panasonic website (https://

panasonic.net/cns/projector/). Note that the verification for devices of other manufacturers has been made for the

items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance

problems caused by the devices of other manufacturers, contact the respective manufacturers.

Application software supported by the projector

The projector supports following application software. For details or downloading each application software, visit

the Panasonic website (https://panasonic.net/cns/projector/).

Logo Transfer Software

This application software transfers the original image, such as company logo, which is projected at the start, to

the projector.

Smart Projector Control

This application software sets and adjusts the projector connected via LAN using a smartphone or a tablet.

Multi Monitoring & Control Software

This application software monitors and controls the multiple display devices (projector and flat panel display)

connected to an intranet.

Early Warning Software

This plug-in software monitors the status of the display devices and their peripherals within an intranet, and

notifies of abnormality of such equipment and detects the signs of possible abnormality. “Early Warning

Software” is preinstalled in the “Multi Monitoring & Control Software”. To use the early warning function of

this plug-in software, install “Multi Monitoring & Control Software” in the PC to be used. By enabling the early

warning function, it will notify of the approximate time to replace the consumables for the display devices,

to clean each part of the display devices, and to replace the components of the display devices, allowing to

execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for

90 days after installing the “Multi Monitoring & Control Software” into a PC. To continuously use after the 90

days, it is necessary to purchase the license of “Early Warning Software” (ET-SWA100 Series) and perform

the activation. Also, depending on the type of license, the number of display devices that can be registered for

monitoring varies. For details, refer to the Operating Instructions of “Multi Monitoring & Control Software”.

Wireless Manager ME6.4

This application software transmits the computer screen to the projector via wireless LAN or wired LAN.
Simultaneous projection from one computer to multiple projectors, or simultaneous projection from multiple

computers to one projector is possible.

Plug and Share

This application software makes it possible to project the computer screen with the projector easily by omitting

the selection of the device when connecting the computer via network by pairing a projector and a computer

using the USB memory.

Wireless Projector

This application software for iOS/Android is used to project files such as PDF or image by transmitting to the

projector via wireless LAN.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the

product without disassembling.

Storing

To store the projector, store in a dry room.

Содержание PT-MZ570






































































































































































































































Результаты поиска

Содержание PT-MZ570

Отзывы:

Похожие инструкции для PT-MZ570

Бренды по названию

Популярные бренды

Panasonic PT-MZ570, Руководство по эксплуатации

Результаты поиска

Содержание PT-MZ570

Отзывы:

Похожие инструкции для PT-MZ570

Бренды по названию

Популярные бренды