Panasonic PT-MZ570, Руководство по эксплуатации

Страница: 144 / 229

Chapter 4 Settings — [NETWORK/USB] menu
144 - ENGLISH
[SSID]
M-DIRECTxxxx
(xxxx is the last four digits of the network ID. The network ID is a fixed value assigned to each product. The
network ID can be confirmed in the standby screen projected when switched to Panasonic APPLICATION
input.)
[CHANNEL] 1
[KEY] M-DIRECTxxxx (the same character string as [SSID])
Setting [USER]
1) Press
as
to select [WIRELESS LAN].
2) Press
qw
to select [USER].
3) Press the <ENTER> button.
f
The [WIRELESS LAN] screen is displayed and the search result of SSID is displayed. Maximum number of
SSID that can be detected at once is 50 (maximum of 5 pages).
f
Currently selected SSID is always displayed at the top, and
n
mark is displayed at the left.
f
A key icon is displayed for the encrypted SSID.
f
The antenna level of each SSID is indicated with the number of
r
. More the number indicates higher the
antenna level.
f
To search the SSID again, press the <DEFAULT> button.
4) Press
as
to select the SSID to connect from the search result, and press the <ENTER> button.
f
To set the SSID without selecting from the search result, select [OTHER].
f
The [WIRELESS DETAILED SETUP] screen (1/2) is displayed.
5) Press
asqw
to select an item, and change the setting according to the operation instruction of the
menu.
[SSID]
Enter the same string as the SSID registered to the access point.
This item can be set when the SSID with the
n
mark at the top was selected in Step 4) , or when
[OTHER] was selected.
[AUTHENTICATION]
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
Select this item when the authentication method for the access
point is Open System.
[SHARED]
Select this item when the authentication method for the access
point is Shared Key.
[WPA-PSK]
Select this item when the authentication method for the access
point is WPA-PSK.
[WPA2-PSK]
Select this item when the authentication method for the access
point is WPA2-PSK.
[WPA-EAP/WPA2-EAP]
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
[WPA-EAP]
Select this item when the authentication method for the access
point is WPA-EAP.
[WPA2-EAP]
Select this item when the authentication method for the access
point is WPA2-EAP.
[ENCRYPTION]
Select the encryption method used for the communication between the projector and the network.
[NONE]
Select this item not to use encryption.
This item can be selected only when [AUTHENTICATION] is set to
[OPEN] or [SHARED].
[WEP]
Select this item when the encryption method is WEP.
This item can be selected when [AUTHENTICATION] is set to
[OPEN] or [SHARED].
[TKIP]
Select this item when the encryption method is TKIP.
This item can be selected when [AUTHENTICATION] is set to
[WPA-PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[AES]
Select this item when AES is used as the encryption method.
This item can be selected when [AUTHENTICATION] is set to
[WPA-PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[DEFAULT KEY]
Set one of numbers from [1] to [4] as the default key.
This item can be set when [AUTHENTICATION] is set to [OPEN] or [SHARED], and [ENCRYPTION]
is set to [WEP].