![background image](http://html.mh-extra.com/html/panasonic/ga-ml-series/ga-ml-series_manual_273698413.webp)
411
14.2.1.6 Firmware Backup to TFTP
14.2.1.6
Firmware Backup to TFTP
Use the following window to save the backup copy of firmware existing in
a switch into a TFTP server.
Choose
Tool > Firmware Upgrade & Backup > Firmware Backup to
TFTP (Servers)
on the tool-bar to display the following window.
Figure 14-7 Firmware Upgrade from TFTP (Servers)
You can configure the following parameters.
Click
Backup
to start performing a backup.
Parameter
Overview
TFTP Server IP
Enter an IP address of a TFTP server.
•
IPv4
- Choose and enter an IPv4 address of a TFTP
server.
•
IPv6
- Choose and enter an IPv6 address of a TFTP
server.
Source File
Enter the source file-name and path of a firmware file in
a switch.
The number of characters for this field can be
up to 64.
Destination File
Enter the destination file-name and path of a firmware
file to be backed
up into a TFTP server. The number of
characters for this field can be up to 64.
Содержание GA-ML Series
