![background image](http://html.mh-extra.com/html/panasonic/ga-ml-series/ga-ml-series_manual_273698164.webp)
162
5.8 LLDP (Link Layer Discovery Protocol) 5.8.1 LLDP Global Settings
Click
Apply
to reflect the change.
In the section of
LLDP-MED Configuration
, you can configure the
following parameter.
Click
Apply
to reflect the change.
In the section of
LLDP Configuration
, you can configure the following
parameters.
Click
Apply
to reflect the change.
Parameter
Overview
Number of
Transmissions for
Fast Start
Enter the value, which is equal to the number of
transmissions regarding the LLDP-MED fast start.
The range is from 1 to 10. When you choose
Default
,
use the default value.
Parameter
Overview
Transmission Interval
for Messages
Enter the transmission-interval for consecutive LLDP
advertisements on each physical interface. The range is
from 5 to 32,768 (seconds). When you choose
Default
,
use (or apply) the default value.
Message TX Hold
Multiplier
Enter the multiplier of the LLDPDU transmission-interval
to use for calculating the value of Time-To-Live (TTL) of
LLDPDU. The range is from 2 to 10. When you choose
Default
, use the default value.
Relnit Delay
Enter the lag time (or retarded time) regarding the LLDP
initialization of an interface. The range is from 1 to 10
(seconds). When you choose
Default
, use the default
value.
TX Delay
Enter the lag time for the transmission of consecutive
LLDPDUs on an interface. The range of valid (or
enabled) values is from 1 to 8,192 (seconds). The value
above must not exceed one-fourth of the value of the
transmission-interval timer. When you choose
Default
,
use the default value.
Содержание GA-ML Series
