![background image](http://html.mh-extra.com/html/panasonic/ga-ml-series/ga-ml-series_manual_273698049.webp)
47
3.7.6 PoE Auto-Reboot Settings
Number of LLDP Error
Retries
(1-10)
This parameter configures the number of retrials during
errors as for monitoring the auto-reboot LLDP, which is
used for the PoE auto-reboot (factory default settings:
3).
Average Traffics
(1-60)
This parameter configures the interval for calculating
the average value of traffics, which exist in a device
(factory default settings: 5).
Traffic Interval
(1-60)
This parameter configures the interval for monitoring
traffics with seconds, as a unit (factory default settings:
5).
Number of Retries
during Traffic Errors
(1-10)
This parameter configures the number of retrials during
traffic errors (factory dsefault Settings: 3).
Global Status of PoE
Auto Reboot
This parameter enables or disables the global settings
for PoE auto-reboot.
Subject of SMTP
Mails regarding PoE
Auto-reboot
This parameter sets a subject when you notify via
emails, which are done (or sent) by an SMTP of PoE
auto-reboot.
Contents of SMTP
Emails regarding PoE
Auto-reboot
This parameter configures the content when notifying
via emails, which are done (or sent) by an SMTP of PoE
auto-reboot.
From Port / To Port
Choose the range of the port-number.
Ping IP Address
This parameter configures an IP address of the Ping,
which is used for the PoE auto-reboot.
LLDP Monitor
This parameter enables or disables the settings for
monitoring LLDP of PoE auto-reboot.
Condition of
Determining Traffics
This parameter configures the determination regarding
an abnormality of PoE terminal because of the
communication-fee. The options available are
None,
Below
and
Over
.
Unit of Threshold
regarding Traffics
This parameter configures the unit of the traffic-
threshold.
Threshold for Traffics
This parameter configures the threshold of traffics.
Condition of
Determination
This parameter configures the condition of determining
an abnormality of the monitoring-methods (e.g. Ping,
LLDP and traffics). The options available are
Or
and
And
.
Sending Emails
This parameter enables or disables the settings for
sending e-mails regarding the PoE auto-reboot.
SNMP Traps
This parameter enables or disables the settings for
SNMP traps regarding the PoE auto-reboot.
PoE OFF/ON
This parameter enables or disables the execution of PoE
OFF/ON when your switch determines an abnormality
of the PoE auto-reboot.
Parameter
Overview
Содержание GA-ML Series
