manualshive.com logo in svg

Panasonic GA-ML Series, Руководство пользователя

Поделиться
Скачать
Panasonic GA-ML Series Скачать руководство пользователя страница 134

132

5 L2  Features

5.6 L2 Protocol Tunnel      

Click 

Apply

 to reflect the change.

Choose the 

L2 Protocol Tunnel Port Settings

 tab to display the 

following window. 

Figure 5-43 L2 Protocol Tunnel

（

L2 Protocol Tunnel Port Settings

）

In the section of

 L2 Protocol Tunnel Port Settings

, you can configure 

the following parameters. 

Tunneled Protocol

Choose a tunneled protocol. The options available are 
as follows.

•

GVRP

 - GVRP packets are tunneled to the address, 

which is configured already.

•

STP

 - STP packets are tunneled to the address, which 

is configured already.

•

MAC

 - Protocol packets with the specific destination 

address are tunneled to the address configured.

•

All

 - All packets are tunneled to the address, which is 

configured already.

Protocol MAC 

After choosing the 

MAC 

option as a 

Tunneled 

Protocol

, choose the destination address, which is 

tunneled on the address configured. The options 
available are

 01-00-0C-CC-CC-CC 

and

 01-00-0C-CC-CC-

CD

. 

MAC Address

Enter a MAC address as the tunneling destination for 
the protocol specified. For this MAC address, you 
cannot specify the address, which is reserved or used by 
other protocols.

Parameter 

Overview 

Parameter 

Overview 

From Port/ To Port

Choose the port you use.

 

Action 

Click 

Add

 to add a new entry based on the information 

entered. Click 

Delete

 to delete an entry based on the 

information entered.

Type

Choose the type option. The options available are

 

None

,

 Shutdown 

and

 Drop

.

Tunneled Protocol

Choose the tunneled protocol option. The options 
available are 

GVRP

,

 STP

,

 Protocol MAC

 and

 ALL

.

Содержание GA-ML Series

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды