![background image](http://html.mh-extra.com/html/panasonic/ga-ml-series/ga-ml-series_manual_273698193.webp)
191
6.4.2
IPv6
Interface
Choose the
Neighbor Discover
tab to display the following window.
Figure 6-12 IPv6 Interface (Show Detail and Neighbor Discover)
In the section of
ND Settings
, you can configure the following
parameters.
Parameter
Overview
Management
Configuration Flag
Set the management configuration flag option to
ON
or
OFF
.
If a neighbor host receives
RA
with the flag, which
is set to on, the host needs to obtain an IPv6 address
with the stateful configuration protocol.
Other Config Flag
Set
Other Config
flag-option to
ON
or
OFF
. If you set
other configuration flags to on, use the stateful
configuration protocol to command the host connected
to obtain the auto-configuration information except an
IPv6 address.
RA Minimum-Interval
Enter the minimum value of the RA interval-time. The
range is from 3 to 1,350 (seconds). The value must be
smaller than the value, equivalent to 75% of the
maximum value.
RA Maximum-
Interval
Enter the maximum value of the RA interval-time whose
range is from 4 to 1,800 (seconds).
RA Lifetime
Enter the value of an RA lifetime.
The range is from 0 to
9,000 (seconds). The lifetime value of RA conveys the
value, which regards a router as a default router on the
host where RA is received.
RA Control
This parameter enables or disables a function of the RA
control.
Reachable Time
Enter the reachable time. The range is from 0 to
3,600,000 (milli-seconds). If the time specified is 0, a
router spends 1,200 (seconds) on an interface to
advertise 1,200 (unspecified) for RA messages. The
reachable time is used to determine the possibility of
reaching a neighbor node due to an IPv6 node.
NS Interval
Enter the value of the
Neighbor Solicitation (NS)
interval. The range is from 0 to 3,600,000 milli-seconds
(the factor of 1,000). If the time specified is 0, a router
spends for one second.
Hop Limit
Enter the value of the hop limit. The range is from 0 to
255. IPv6 packets created by a system uses the value as
the initial hop limit.
Содержание GA-ML Series
