Co
nve
n
ien
t func
tions
VQT3C77
85
¾
Deep Colour Output
This setting is for selecting whether to use Deep Colour
output when a TV that supports Deep Colour is
connected.
¾
HDMI Audio Output
Select “Off” when connected to a TV with an HDMI
cable, and connected to an amplifier not compatible
with HDMI with a DIGITAL AUDIO OUT terminal.
¾
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
¾
VIERA Link
Set to use “HDAVI Control” function when connected
with an HDMI cable to a device that supports “HDAVI
Control”.
≥
Select “Off” when you do not want to use “HDAVI
Control”.
∫
AV1 Output
Set according to the terminal of the connected TV.
∫
AV2 Settings
¾
AV2 Input
Set according to the output from the external
equipment.
¾
Ext Link
Set “Ext Link 1” when a Set Top Box which transmits a
control signal via the 21-pin Scart cable is connected.
≥
This setting cannot be made when “TV System” is set
to “NTSC” (
>
84).
∫
Common Interface
Access to software contained on CI module. (
>
12)
≥
Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
≥
On-screen instructions may not correspond to the remote control
buttons.
≥
For more information about TV service, please contact your service
provider.
≥
Depending on the card, in some cases its use together with this unit may
be limited or not possible.
∫
Network Easy Setting
Press [OK] to start Network Easy Setting. (
>
21)
∫
Network Settings
¾
IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥
Press [OK] to show the respective setting.
≥
“Connection Speed Setting” is enabled only when “Connection
Speed Auto-configure” is turned “Off”.
¾
Proxy Server Settings
Check and set the connection to the Proxy server.
≥
Press [OK] to show the respective setting.
¾
Internet Content Settings
¾
Lock
You can restrict using VIERA CAST.
≥
Follow the on-screen instructions.
≥
PIN is required to change. (
>
78)
¾
Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥
Depending on contents, this function will not work.
≥
Select “Off” when the audio is warped.
Connection
AV2 Settings
AV2 Settings
AV2 Input
Ext Link
Network
Setup
Network
Network
Network Easy Setting
Network Settings
Network
Network Settings
Network Settings
Proxy Server Settings
Internet Content Settings
Home Network ( DLNA ) Server Settings
IP Address / DNS Settings
Network Settings
Internet Content Settings
Internet Content Settings
Automatic Volume Control
Lock
DMRXS400EG-VQT3C77_eng.book 85 ページ 2011年5月16日 月曜日 午前9時3分